The Kenwood KAC-9106D is a Class D mono power amplifier for car audio systems. It is rated at 500 W x 1 into a 4-ohm load and 1000 W x 1 into 2 ohms, with 1000 watts total RMS power and a maximum output of 2000 W. It is stable with 2-ohm loads.
Sound can be tuned with a variable low-pass filter from 50 to 200 Hz at 24 dB/oct, a variable bass boost from 0 to 18 dB, and an infrasonic filter set at 20 or 50 Hz at -24 dB/oct.
The frequency response is 5 Hz to 200 Hz and the signal-to-noise ratio is 100 dB. The amplifier runs on 14.4 V, with 11 V to 16 V allowable, and draws a maximum of 65 A. It measures 335 x 56 x 192 mm.
- Type
- Class D mono power amplifier
- Total RMS Power
- 1000 watts
- Maximum Power
- 2000 W
- Rated Power (4Ω)
- 500 W x 1
- Rated Power (2Ω)
- 1000 W x 1
- Load Capability
- 2Ω stable
- Low-Pass Filter
- 50–200 Hz, 24 dB/oct
- Bass Boost
- 0–18 dB, variable
- Infrasonic Filter
- 20/50 Hz, -24 dB/oct
- Signal-to-Noise Ratio
- 100 dB
- Frequency Response
- 5 Hz – 200 Hz
- Operating Voltage
- 14.4 V (11 V – 16 V allowable)
- Maximum Current
- 65 A
- Dimensions
- 335 x 56 x 192 mm