What can the KFFKFF wet tile saw cut?

Ceramic and porcelain tile and lighter stone up to 1.25 inches thick. It handles straight cuts and diagonal cuts up to 45 degrees.

Does it need a water hookup?

No. It has its own water reservoir, so you fill the tray and the blade picks up water as it spins.

The induction motor is quieter and smoother than the brushed motors on many budget wet saws, though it is still a power tool.

Is it good for large-format tile?

Not really. The 7-inch blade and 1.25-inch depth suit standard tile; large-format panels need a bigger saw.

Is it worth it over a basic snap cutter?

Yes if you need diagonal cuts, stone or dust control. A snap cutter is faster and cheaper for plain straight ceramic cuts.

Where is the KFFKFF Wet Tile Saw cheapest?

At Walmart, for $63.70, as of our latest check.

What do buyers say about the KFFKFF Wet Tile Saw?

Rated 3.9 out of 5 from 27 ratings.

KFFKFF Wet Tile Saw

Best price now

$63.70at WalmartChecked Nov 12

Prices are checked against each store and labelled with when.

Visit Walmart

KFFKFF Wet Tile Saw

Best price now

$63.70at WalmartChecked Nov 12

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $63.70 at Walmart on Nov 12.

Our take on the KFFKFF Wet Tile Saw

The KFFKFF Wet Tile Saw is a 7-inch benchtop cutter with a water reservoir, a 3,500 rpm induction motor and an adjustable miter angle from 0 to 45 degrees. It cuts to a maximum depth of 1.25 inches, which covers most wall and floor tile plus some stone. The water bath keeps dust down and cools the blade, and the induction motor runs quieter with less vibration than the brushed motors on many budget saws. It suits DIY tilers and light remodeling work; it is not a production saw for a crew cutting large-format tile all day.

Best forDIY bathroom and kitchen tile jobsStraight and 45-degree diagonal cutsCutting tile and light stone at homeShoppers who want a quieter wet saw

Pros

Water reservoir controls dust and cools the blade
Induction motor runs quieter with low vibration
Adjustable 0-45 degree miter for diagonal cuts
Built-in angle scale helps beginners
Reset safety switch

Cons

1.25-inch depth limit rules out thick stone and large-format tile
7-inch blade is small for big jobs
Mixed owner feedback on cut accuracy and setup

KFFKFF Wet Tile Saw prices at every store

WalmartNew
In stock
$63.70Checked Nov 12
Visit Walmart

Also available at

WalmartCheck price at Walmart

KFFKFF Wet Tile Saw price history

Lowest price we've seen: $70.19 on Nov 12 at Walmart. Tracked across 1 store since Nov 12.

What reviewers say

3.9 / 527 ratings

Ratings average 3.9 out of 5 from 27 buyers, so reception is decent but not glowing. Owners like the low noise and the dust control from the water bath; some report accuracy and setup issues.

What people mention

NoisePraisedOwners say the induction motor keeps it quieter than expected for a wet saw.
Dust controlPraisedThe water reservoir keeps dust down and the work area cleaner.
Cut accuracyMixedSome buyers get clean cuts; others say the fence and angle settings drift.
SetupCriticisedAlignment and assembly take time before the first accurate cut.
Cutting depthCriticisedThe 1.25-inch maximum limits thicker stone and large-format tile.

About the KFFKFF Wet Tile Saw

This is a 7-inch wet tile saw for cutting tiles and stone. A water reservoir keeps the work area cleaner, because dust settles in the water. The water also cools the blade, which extends blade life and improves cutting efficiency.

It has an induction motor that runs at 3500 rpm with low vibration and noise. The table is made of zinc-coated Q235A steel, which resists rust and scratches. The saw weighs 9.2 kg (20.2 lb).

The cutting angle adjusts from 0 to 45 degrees for straight and diagonal cuts, and a built-in scale helps with positioning. To use it, place the tile, set the angle, start the motor and push the tile gently through the blade. A reset safety switch prevents accidental restarts after a power interruption. A protective shield covers the blade to prevent accidental contact.

Model: TC180
Blade size: 7 in x 0.6 in / 180 mm x 15.9 mm
Blade thickness: 0.09 in / 2.2 mm
Blade material: 65Mn steel
Cutting angle: Adjustable, 0 to 45 degrees
Max cut depth: 1.25 in / 31 mm
Table size: 13 x 14 in / 330 x 360 mm
Table material: Q235A steel, zinc-coated surface
Motor: Induction motor, 3500 rpm ±10%
Weight: 9.2 kg / 20.2 lb
Safety: Reset safety switch, protective blade shield
In the box: 1 x wet tile saw, 3 x wrenches, 1 x user manual

Specifications

color: OrangeSource
size: 7"Source

Questions and answers

What can the KFFKFF wet tile saw cut?: Ceramic and porcelain tile and lighter stone up to 1.25 inches thick. It handles straight cuts and diagonal cuts up to 45 degrees.
Does it need a water hookup?: No. It has its own water reservoir, so you fill the tray and the blade picks up water as it spins.
How loud is it?: The induction motor is quieter and smoother than the brushed motors on many budget wet saws, though it is still a power tool.
Is it good for large-format tile?: Not really. The 7-inch blade and 1.25-inch depth suit standard tile; large-format panels need a bigger saw.
Is it worth it over a basic snap cutter?: Yes if you need diagonal cuts, stone or dust control. A snap cutter is faster and cheaper for plain straight ceramic cuts.
Where is the KFFKFF Wet Tile Saw cheapest?: At Walmart, for $63.70, as of our latest check.
What do buyers say about the KFFKFF Wet Tile Saw?: Rated 3.9 out of 5 from 27 ratings.