

Prices are checked against each store and labelled with when.
A bass package built around Kicker's 15-inch CompVR subwoofer, paired with a 400-watt mono Class D amp and an 8-gauge install kit. The sub handles 500W RMS with dual 4-ohm voice coils, so it can be wired to 2 or 8 ohms; the amp is 1-ohm stable and rated 400W RMS at 1 ohm, 300W at 2 ohms. That mismatch matters: the amp delivers less than the sub's rating, so it works best as a moderate-power setup rather than a full-power one. The sub needs a large enclosure, at least 1.8 cu. ft. sealed or 3 cu. ft. vented, which limits it to trunks and hatchbacks with room to spare. Buyers wanting deep, loud bass on a budget get a coherent kit; those chasing maximum output should look at a stronger amp or a sub that matches it.
In stockSold by HiFiSoundConnectionReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
Owner feedback on the CompVR line is generally positive on output and durability for the money, with the 15-inch version noted for deep bass in a properly sized vented box. Complaints center on the large box requirement and on pairing it with an amp that can actually feed it.
This package combines a Kicker 43CVR154 15" CompVR subwoofer, an HA-A400.1 mono Class D amplifier and an 8-gauge amplifier installation kit. The subwoofer has dual 4-ohm voice coils and handles 500W RMS, with a peak rating of 1000W.
The sub mounts with a depth of 8-3/16". It is rated at 89.2 dB sensitivity and is specified for a sealed box of 1.8 to 5.2 cu. ft. or a vented box of 3 to 5 cu. ft.
The HA-A400.1 is a one-channel Class D amplifier that is 1-ohm stable, with a frequency response of 10Hz to 180Hz and a signal-to-noise ratio of 95 dB. It turns on by DC offset or a 12V remote signal and includes a bass remote. The install kit is 8 gauge with nickel hardware.
It checks today's price at every store, compares the alternatives and answers in about a minute.











