The Kicker CXA800.1 is a Class-D mono amplifier from the CX-Series. It is one-ohm stable and delivers up to 800 watts into one bass channel. It accepts up to 40 volts (400 watts) of speaker-level input, so a line-out converter is not needed.
It has a variable 12dB crossover and a 24dB subsonic filter to help tune the system and protect against damaging low frequencies. KickEQ adds a variable bass boost of up to 6dB. FIT+ (Fail-safe Integration Technology-PLUS) lets it work with nearly every radio. A three-second turn-on/off delay eliminates unwanted interference.
Full-range RCA pass-through outputs let you add other bass amps or a full-range amp. The small footprint eases installation. It can be mounted in a standard position or vertically, and the vertical mounting hardware is included. The optional CXARC Remote Bass Controller, sold separately, adjusts bass output from the dash.
- Model
- CXA800.1 (46CXA800.1T)
- Type
- Class-D mono amplifier
- Power at 4 ohms
- 300 watts x 1
- Power at 2 ohms
- 600 watts x 1
- Power at 1 ohm
- 800 watts x 1
- Dimensions
- 2-3/8 in (5.9 cm) H x 6-3/4 in (17 cm) W x 8-1/8 in (20.6 cm) L
- Frequency response
- 25-200 Hz, +0/-1 dB
- Input sensitivity
- Low level: 125 mV-5 V; high level: 1 V-40 V
- Signal-to-noise
- >95 dB, A-weighted, re: rated power
- Crossover
- Variable low-pass, 50 Hz-200 Hz, 12 dB/octave
- Subsonic filter
- 25 Hz at 24 dB/octave
- KickEQ boost
- Variable 0-6 dB at 40 Hz
- Outputs
- Full-range RCA pass-through
- Remote
- Compatible with CXARC Remote Bass Controller (sold separately)
- Mounting
- Standard or vertical; vertical mounting hardware included