What temperatures does Kodak PETG print at?

PETG generally prints around 230–250 °C at the nozzle with a bed near 70–80 °C. Start in the middle of those ranges and adjust for your printer.

How is PETG different from PLA?

PETG is stronger and holds up better to heat than PLA. It is also tougher and slightly flexible, but it prints slower and strings more.

Is PETG better than ABS?

PETG is about as strong as ABS but warps far less and gives off little odor. ABS still handles higher heat and can be smoothed with acetone.

Does it need a heated bed?

Yes. A heated bed helps the first layer stick and reduces lifting. A PEI sheet or glue stick on glass improves adhesion further.

Is the filament dry when it arrives?

PETG absorbs moisture, which causes popping and cloudy prints. Dry it if prints bubble, and store it sealed with desiccant.

What can I print with translucent orange PETG?

Use it for parts that show light, like lamp covers and display pieces, or for functional parts where color matters. Translucency makes infill and layer lines visible.

Kodak 3D Printing Filament PETG 1.75 mm (Translucid Orange)

Best price now

$20.99at WalmartChecked Nov 12

Prices are checked against each store and labelled with when.

Visit Walmart

Kodak 3D Printing Filament PETG 1.75 mm (Translucid Orange)

Best price now

$20.99at WalmartChecked Nov 12

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $20.99 at Walmart on Nov 12.

Our take on the Kodak 3D Printing Filament PETG 1.75 mm (Translucid Orange)

Kodak PETG is a 1.75 mm 3D printing filament in translucent orange. PETG sits between PLA and ABS: it is stronger and more heat resistant than PLA, and prints with far less warping than ABS while giving off little odor. It suits printers with a heated bed who want durable, slightly flexible parts for functional prints. Compared with PLA it needs higher nozzle and bed temperatures and slower speeds, and it strings more than PLA, so it is not the easiest first filament.

Best forFunctional parts that need strength and heat resistanceEnclosures and brackets that would warp in ABSPrinters with a heated bedMakers moving up from PLA

Pros

Stronger and more heat resistant than PLA
Much less warping than ABS
Low odor while printing
Tough, slightly flexible parts
Works on common 1.75 mm printers with a heated bed

Cons

Needs higher nozzle and bed temperatures than PLA
Strings and oozes more than PLA
Poor first-layer adhesion without a good bed surface
Translucent color shows layer lines and infill

Kodak 3D Printing Filament PETG 1.75 mm (Translucid Orange) prices at every store

WalmartNew
In stockSold by Audio Are UsReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$20.99Free shippingChecked Nov 12
Visit Walmart

About the Kodak 3D Printing Filament PETG 1.75 mm (Translucid Orange)

This is a PETG 3D printing filament with a 1.75 mm diameter, in translucent orange. It is an easy-to-use material.

PETG is stronger and more temperature resistant than PLA. It is as strong as ABS but warps much less when printed, and it is odorless.

Material: PETG
Diameter: 1.75 mm
Color: Translucent orange
Brand: Kodak

Specifications

actual_color: OrangeSource
color: OrangeSource

Questions and answers

What temperatures does Kodak PETG print at?: PETG generally prints around 230–250 °C at the nozzle with a bed near 70–80 °C. Start in the middle of those ranges and adjust for your printer.
How is PETG different from PLA?: PETG is stronger and holds up better to heat than PLA. It is also tougher and slightly flexible, but it prints slower and strings more.
Is PETG better than ABS?: PETG is about as strong as ABS but warps far less and gives off little odor. ABS still handles higher heat and can be smoothed with acetone.
Does it need a heated bed?: Yes. A heated bed helps the first layer stick and reduces lifting. A PEI sheet or glue stick on glass improves adhesion further.
Is the filament dry when it arrives?: PETG absorbs moisture, which causes popping and cloudy prints. Dry it if prints bubble, and store it sealed with desiccant.
What can I print with translucent orange PETG?: Use it for parts that show light, like lamp covers and display pieces, or for functional parts where color matters. Translucency makes infill and layer lines visible.
Where is the Kodak 3D Printing Filament PETG 1.75 mm (Translucid Orange) cheapest?: At Walmart, for $20.99, as of our latest check.
What do buyers say about the Kodak 3D Printing Filament PETG 1.75 mm (Translucid Orange)?: Rated 4.2 out of 5 from 6 ratings.

More from Kodak

KODAK 10.1 Inch WiFi Digital Picture Frame with 32GB Storage

KODAK RWF-116B WiFi Digital Photo Frame

Kodak RWF-116B 11.6-Inch Wi-Fi Digital Photo Frame

All Kodak deals and products →