Will this kit fit my Mercury 9.9 hp?

It is listed for Mercury/Mariner 6, 8, 9.9, 10, 15, 20 and 25 hp motors, but fit depends on the carburetor part number. Check the number stamped on your carb against the listed numbers before ordering.

Is this an OEM Mercury part?

No. It is a KODASW aftermarket kit, not a Mercury-branded part. The parts are made to match the listed part numbers.

One set of carburetor rebuild parts: the gaskets, seals and small components needed to reseal and clean a carburetor. The carburetor body and jets are not included.

Does it come with instructions?

Yes, basic installation instructions are included. They are not a full service manual, so a factory manual for your motor helps with torque and tuning.

Can I use it in saltwater?

The rubber and plastic parts are described as oxidation-resistant for saltwater and humid use. Rinse the motor after saltwater runs as usual.

Will it fix a leaking or clogged carburetor?

It is intended to address common clogging and leak problems by replacing worn seals and gaskets. If the carb body or jets are damaged, the kit alone will not fix it.

KODASW Universal Outboard Carburetor Rebuild Kit

Best price now

$11.72at WalmartChecked Nov 12

Prices are checked against each store and labelled with when.

Visit Walmart

KODASW Universal Outboard Carburetor Rebuild Kit

Best price now

$11.72at WalmartChecked Nov 12

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $11.72 at Walmart on Nov 12.

Our take on the KODASW Universal Outboard Carburetor Rebuild Kit

A carburetor rebuild kit for Mercury/Mariner outboards from 6 to 25 hp, covering part numbers 1395-9761-1, 1395-811357, 1395-9645 and several others in that series. It bundles gaskets, seals and small parts aimed at fixing the common problems that foul small outboard carbs: clogging, leaks and rough running. The parts are rubber and plastic, chosen to resist saltwater and humidity. It suits owners of older Mercury 6-25 hp motors who want to rebuild a carb themselves rather than replace it, though the fit depends on matching your exact part number.

Best forOwners of Mercury/Mariner 6-25 hp outboardsDIY carburetor cleaning and resealingSaltwater and humid-climate boatsRestoring an older motor that runs rough

Pros

Covers a wide spread of Mercury 6-25 hp part numbers
Includes the small seals and gaskets needed for a typical rebuild
Rubber and plastic parts rated for saltwater and humidity
Aims at the usual carb faults: clogging, leaks, poor combustion
Cheaper than a replacement carburetor

Cons

Fit depends on matching your exact carburetor part number
Generic kit, not an OEM Mercury part
Instructions are basic; no torque or tuning guidance
No carburetor body or jets included, only the rebuild parts
Color and finish may vary from the listing

KODASW Universal Outboard Carburetor Rebuild Kit prices at every store

WalmartNew
In stockSold by HengyifengReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$11.72Free shippingChecked Nov 12
Visit Walmart

About the KODASW Universal Outboard Carburetor Rebuild Kit

This is a carburetor rebuild kit for outboard motors. It fits Mercury Marine 6 to 25 HP engines and is meant to fix common carburetor problems such as clogging and leaks. The kit includes the parts for these repairs.

The kit is made of oxidation-resistant rubber and plastic, which hold up in saltwater and humidity. The design seals well to help prevent leaks. Detailed instructions are included for installation.

Type: Outboard carburetor repair kit
Compatibility: Mercury Marine 6HP, 8HP, 9.9HP, 10HP, 15HP, 20HP, 25HP
Part numbers: 1395-9761-1, 1395-811357, 1395-9645, 1395-9377, 1395-9803, 1395-9725, 1395-9179, 1395-9761, 18-7212
Material: Oxidation-resistant rubber and plastic
Measurement tolerance: 0-1 cm error from manual measurement
In the box: 1 carburetor repair kit set, with installation instructions

Specifications

color: OtherSource

Questions and answers

Will this kit fit my Mercury 9.9 hp?: It is listed for Mercury/Mariner 6, 8, 9.9, 10, 15, 20 and 25 hp motors, but fit depends on the carburetor part number. Check the number stamped on your carb against the listed numbers before ordering.
Is this an OEM Mercury part?: No. It is a KODASW aftermarket kit, not a Mercury-branded part. The parts are made to match the listed part numbers.
What is in the kit?: One set of carburetor rebuild parts: the gaskets, seals and small components needed to reseal and clean a carburetor. The carburetor body and jets are not included.
Does it come with instructions?: Yes, basic installation instructions are included. They are not a full service manual, so a factory manual for your motor helps with torque and tuning.
Can I use it in saltwater?: The rubber and plastic parts are described as oxidation-resistant for saltwater and humid use. Rinse the motor after saltwater runs as usual.
Will it fix a leaking or clogged carburetor?: It is intended to address common clogging and leak problems by replacing worn seals and gaskets. If the carb body or jets are damaged, the kit alone will not fix it.
Where is the KODASW Universal Outboard Carburetor Rebuild Kit cheapest?: At Walmart, for $11.72, as of our latest check.

More carburetor rebuild kits

All-Carb Carburetor Rebuild Kit

Lab Work Carb Carburetor Rebuild Repair Kit

kedijiadianzi Carburetor Repair Kit