
Kreg Adaptive Cutting System Plunge-Cut Track Saw and 62 in. Universal Track Kit, 12A, 120V ACSCT2000
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Kreg Adaptive Cutting System pairs a 12-amp plunge-cut track saw with a 62 in. Universal Track for straight, splinter-free cuts in plywood and solid lumber. The 6-1/2 in. 48-tooth blade cuts 2-1/8 in. deep at 90 degrees and 1-1/2 in. at 45, with bevel from -1 to 47 degrees. Its blade-left layout gives right-handed users a clear view of the cutline, and the track's zero-offset edge and anti-chip strip line up fast and limit tear-out. It suits trim carpenters and cabinet makers who want guided accuracy without a full table saw, though it is a corded tool and the single track limits long rips.
In stockReturn policy
The Kreg Adaptive Cutting System is a plunge-cut track saw paired with a 62 in. Universal Track. It makes straight, smooth, splinter-free cuts in sheet goods and solid lumber. The guided system provides track-saw accuracy with up to 50 in. of cutting capacity when used solo.
A 12-amp, 120V motor drives a 6-1/2 in. 48-tooth carbide-tipped blade. The saw cuts up to 2-1/8 in. deep at 90 degrees and 1-1/2 in. deep at 45 degrees. Bevel capacity spans -1 degree to 47 degrees.
The blade-left design gives right-handed users a clear sightline along the cutline. Safety features include a spring-loaded riving knife, an electronic blade brake, a selectable anti-kickback control switch, and an anti-tip tab on the baseplate. The track's zero-offset edge aligns with the cutline, while a zero-clearance anti-chip strip supports wood fibers at the cut edge. GripMaxx anti-slip backing holds the track without clamps for many standard cuts, and low-friction top glide strips keep saw movement smooth.





