
KwikSafety LEMUR Cable Anchor Sling 6'
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The KwikSafety LEMUR is a 6-foot cable anchor sling for personal fall protection. It uses 1/4-inch galvanized steel cable in a vinyl coating, with steel thimbles, swaged aluminum ferrules and two alloy steel pass-through O-rings; the smaller ring is sized for clipping an SRL or lanyard. It is rated for a 130-310 lb user capacity with a 5,000 lb minimum static strength and is built to OSHA compliance. It suits roofers, ironworkers, arborists and linemen who need a reusable wire tie-off around rebar, beams or trunks, where a cable sling resists abrasion and cutting better than webbing.
In stockReturn policy
The LEMUR is a 6-foot cable anchor sling that provides an anchor point for connecting a safety lanyard or lifeline as part of a personal fall protection system. The cable is 1/4-inch vinyl-coated galvanized steel, assembled with steel thimbles and swaged aluminum ferrules. Two alloy steel pass-through O-rings connect through two small eyelets, and the smaller O-ring is sized for connecting an SRL or lanyard.
The sling has a user capacity of 130–310 lbs and a minimum static strength of 5,000 lbs. It is used for roof anchor and arborist applications and for cable tie-off on rebar and other assemblies. It is not a shock-absorbing lanyard and is not a replacement for a safety harness lanyard or lifeline.
The anchor is designed for work positioning and must be used with a safety harness and a safety lanyard or SRL that has D-rings or other anchor points. It meets ANSI Z359.1-2007 and is third-party tested, and it is built for jobs that require OSHA compliance.