29% under what the other stores charge
Compared across 6 stores. Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The FreeZone 2.5L Triad is a benchtop freeze dryer built for lab work, not food. Two 1/3 HP compressors pull the collector to -85°C, and a 1000 W heater drives a fluid medium through the shelf so you can program ramp-and-hold cycles from -55°C to +50°C. It removes 1.84 L of water in 24 hours and holds 2.5 L of ice before hot-gas defrost. The 5-inch Lyo-Works touchscreen shows live collector temperature and vacuum, which puts it ahead of older push-button FreeZone models and simpler benchtop units that lack shelf temperature control. It suits labs drying small batches of samples, not hobbyists.
In stock
In stock
In stock
In stock
In stock
In stock
Lowest price we've seen: $31,148.00 on Nov 9 at Laboratory-Equipment.com. Tracked across 6 stores since Nov 9.
The Labconco FreeZone 2.5L -85°C Triad is a benchtop freeze dryer for 230V, 60Hz power. A stainless steel collector coil removes 1.84 L of water in 24 hours and holds 2.5 L of ice before it needs to be defrosted. The defrost uses hot gas.
Two 1/3 HP HCFC/CFC-free refrigeration compressors cool the collector to -85°C (-121°F). They work together with a 1000-watt heater to cool and heat the fluid that circulates through channels in the shelf. The processing shelf measures 12.4" wide by 14.5" deep (31.5 x 36.8 cm). The space between the shelf and the top of the chamber fits containers with stoppers up to 148 mm tall.
A 5" full-color capacitive touchscreen runs the Lyo-Works OS and shows collector temperature and vacuum level in real time. Temperature ramp and hold programs can be set from -55°C to +50°C (-67°F to +122°F), and to -75°C (-103°F) during pre-freezing. Manual start-up buttons control collector and shelf temperature and vacuum pull down. One probe monitors the sample temperature in the chamber.