
LANKANG 6 Pack HDPE Linear Trench Drain 20.1x5.5x3.5in with Grates & End Caps 3306 Lbs Load Outdoor Drainage Channel for Patio Driveway Pool Garden
Where to buy
No store is showing a current price right now. The stores below sell it; ask the agent to check today's prices.
Prices are checked against each store and labelled with when.
Our take on the LANKANG 6 Pack HDPE Linear Trench Drain 20.1x5.5x3.5in with Grates & End Caps 3306 Lbs Load Outdoor Drainage Channel for Patio Driveway Pool Garden
This is a six-piece kit of modular HDPE trench drain channels, each 20.1 x 5.5 x 3.5 inches, with a grate and end caps. The trough is about 3.9 inches wide and 1.8 inches deep, and the segments screw together to reach a longer run. HDPE resists sunlight and moisture, and the rated load is 3306 lbs, so it handles foot traffic and light vehicles when set into concrete, brick or a deck. The detachable grates lift out for cleaning. It suits patios, pool decks, driveways and walkways where water pools. Against cast-iron or concrete channel drains it is lighter and easier to cut and set, but plastic channels flex more and the screw joints need care to stay aligned.
- Six channels with grates and end caps in one kit
- HDPE resists sun and damp
- 3306 lbs rated load
- Segments screw together for longer runs
- Grates lift out for debris cleaning
LANKANG 6 Pack HDPE Linear Trench Drain 20.1x5.5x3.5in with Grates & End Caps 3306 Lbs Load Outdoor Drainage Channel for Patio Driveway Pool Garden prices at every store
- WalmartNew
Out of stockSold by Lan Kang ShoppingReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$79.99Free shippingChecked 11 h ago
About the LANKANG 6 Pack HDPE Linear Trench Drain 20.1x5.5x3.5in with Grates & End Caps 3306 Lbs Load Outdoor Drainage Channel for Patio Driveway Pool Garden
This set includes 6 black HDPE linear trench drain channels. Each channel measures 20.1 x 5.5 x 3.5 inches and comes with a grate and end caps. The channels are made from weather-resistant HDPE that resists sunlight and dampness.
Each trough is 3.9 inches wide and 1.8 inches deep for draining water. Segments connect with screws to extend the total length. The grates are detachable, so debris can be cleaned out easily.
The drain has a maximum load capacity of 3306 lbs. It can be embedded into concrete, brick or deck surfaces to deal with standing water in yards, driveways, pool sides and walkways.
- Material
- HDPE
- Color
- Black
- Quantity
- 6 channels
- Channel size
- 20.1 x 5.5 x 3.5 in each
- Trough size
- 3.9 in wide, 1.8 in deep
- Load capacity
- 3306 lbs maximum
- Connection
- Segments join with screws
- Included
- 6 channels with grates and end caps
- Installation
- Embeds into concrete, brick or deck surfaces
Specifications
- number_of_pieces
Ask our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.
Questions and answers
- How much length does the six-pack cover?
- Six channels at 20.1 inches each give about 10 feet of run before end caps and joint overlap. Screw the segments together to extend the total length.
- Can I drive a car over it?
- The rated load is 3306 lbs, which covers foot traffic and light vehicles when the channel is properly embedded. Heavy trucks and constant wheel loads are beyond what an HDPE channel is built for.
- How deep is the trough?
- The channel is 3.5 inches tall overall, with a trough about 3.9 inches wide and 1.8 inches deep. That suits typical surface runoff, not high-volume flows.
- How do I clean it?
- The grates detach, so you lift them out and clear leaves and silt from the trough. Do this before the debris packs down.
- What surfaces can it be set into?
- It can be embedded in concrete, brick or deck surfaces. The channel needs a firm, level bed so the load spreads evenly.
- Does it come with end caps?
- Yes. The kit includes grates and end caps for the run ends.




















