Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
A desktop laser cutter and engraver with a fully enclosed housing, a built-in camera and air assist. It pairs a diode laser with an infrared laser in one module, so it can engrave and cut wood, acrylic, leather, PCB and coated metal without swapping heads. The CoreXY frame and 0.08mm spot give fine detail at high speed. The closed box cuts smoke and noise, and it adds flame detection, tilt and over-temperature protection and an emergency stop. It suits hobbyists and small shops who want one machine for mixed materials and safer indoor use. Against open-frame diode engravers it is bulkier and more complex, and its real cutting depth on thick wood and clear acrylic trails a CO2 laser.
In stockReturn policy
This is a desktop laser engraver and cutter with an enclosed housing and a Class I laser rating. It combines infrared and diode lasers in one module, so it can switch between them. It is rated at 24W (24000mW) and works on more than 300 materials, including wood, bamboo, paper, acrylic, leather, PCB boards, anodized aluminum and metal.
It has a CoreXY structure with a motion compensation algorithm. The laser head uses 0.08mm compressed spot technology, with an engraving precision of 0.01mm and a top engraving speed of 48,000mm/min. The frame is aviation-grade aluminum. The X-axis uses an industrial guide and the Y-axis uses a linear guide.
The enclosed body reduces smoke by 90% and blocks smoke and noise. Protections include fire detection with an alarm, over-temperature, limit, tilt and flame detection, a power lock and an emergency stop switch. A built-in camera module lets you position materials by dragging, with positioning accuracy up to 2mm. A 30L/min air-assist pump, a waste drawer and a honeycomb plate are included.
