What does 600 WOG and 150 WSP mean?

600 WOG is the non-shock water, oil and gas pressure rating in PSI; 150 WSP is the saturated steam rating. Both are maximums, so stay under them for the media and temperature you use.

Can it be used on natural gas or propane?

Yes. It is CSA certified for natural, manufactured, mixed and LP gas-air mixtures, and it is UL Listed and FM Approved.

What thread type does it have?

Both ends are female NPT threads, meeting ANSI/ASME B1.20.1. It is an inline, one-way valve, so flow direction matters.

Is it full port or standard port?

Full port. The bore matches the pipe inside diameter, so it adds little restriction compared with a standard-port valve.

What is a blowout-proof stem?

The stem is bottom-loaded with a PTFE thrust washer, so pressure cannot push it out of the body. That makes it safer on higher-pressure lines.

What media can it handle?

Water, steam and oil within its pressure and 250 degree F temperature limits. Brass is not suited to aggressive or corrosive media.

Where is the Legend Valve 1-1/2" Brass Ball Valve cheapest?

At eBay, for $35.00, 47% under what the other stores charge, as of our latest check.

What do buyers say about the Legend Valve 1-1/2" Brass Ball Valve?

Rated 4.7 out of 5 from 12 ratings.

Where can I buy the Legend Valve 1-1/2" Brass Ball Valve?

11 stores we checked sell it, including Walmart, Zoro, eBay, MSC Industrial Supply, DK Hardware.

Legend Valve 1-1/2" Brass Ball Valve Price History: $35.00 at eBay

What reviewers say

4.7 / 512 ratings

Ratings are high, with buyers treating it as a solid, well-built brass valve for its size. Few written comments go into detail beyond general satisfaction with the build and operation.

What people mention

BuildPraisedBuyers describe the brass body and stem as solid and well made.
OperationPraisedThe lever is reported to turn smoothly.
FlowPraisedThe full-port bore is noted for not choking flow.

From PlumbingSupplyandMore.com

Full port design — bore matches pipe ID for minimal flow restriction
600 PSI, 250 degree F rating for water, steam, and oil media
CSA certified for natural, manufactured, mixed, and LP gas air mixtures
Blowout-proof, bottom-loaded stem with PTFE thrust washer
Dacromet-coated lever handle and retaining nut resist corrosion
UL Listed and FM Approved; meets ANSI/ASME B1.20.1 and MSS SP-110

Sizes: 1-1/2 in
Materials: Forged brass body, end adapters and one-piece ball; chrome-plated ball; TFM/PTFE seats; brass stem; dual Viton O-rings; Dacromet-coated handle and nut
Fit: FNPT x IPS threaded ends, not solder or press — confirm your line is set up for a threaded connection
Guarantee: 5/25 year warranty
Returns: 30-day return policy; item must be in original condition; return shipping costs are the customer's responsibility
Shipping: Free same day shipping for most orders; this item eligible for free shipping on qualifying orders
Packs: Buy 4, 8 or 12 for extra savings

About the Legend Valve 1-1/2" Brass Ball Valve

This is a 1-1/2" full port brass ball valve with female NPT (FNPT) threaded ends on both sides. The full port design matches the bore to the pipe ID, so flow is restricted as little as possible. It is a standard inline valve with one-way flow and a lever handle.

The body, end adapters and one-piece ball are forged brass, and the ball is chrome plated. The seats are TFM/PTFE and the stem is brass. The stem is bottom-loaded and blowout-proof, with a PTFE thrust washer, and dual Viton O-rings seal it. The lever handle and retaining nut are Dacromet coated to resist corrosion.

The valve is rated for water, steam and oil media. It is CSA certified for natural, manufactured, mixed and LP gas air mixtures. It is UL Listed and FM Approved, and it meets ANSI/ASME B1.20.1 and MSS SP-110. The ends are threaded, not solder or press, so the line must be set up for a threaded connection.

Size: 1-1/2 in
Ends: FNPT x FNPT (IPS threaded)
Port: Full port
Pressure rating: 600 WOG, 150 WSP (600 PSI, 250°F)
Media: Water, steam, oil
Body material: Forged brass
Seats: TFM/PTFE
Seals: Dual Viton O-rings
Handle: Lever, Dacromet coated
Certifications: CSA (gas), UL Listed, FM Approved