Does the display show the soldering iron temperature?

No. The digital display shows only the hot air gun temperature. The iron is set with a scale knob on the control panel.

How do I calibrate the hot air temperature?

Hold the down arrow on the heat gun panel, switch on the heat gun, and release when CAL appears. The screen shows 000, then you offset the reading between -99 and 99 degrees with the two adjustment buttons.

How is the soldering iron calibrated?

Insert a small screwdriver into the second hole under the CAL logo. Turn clockwise to raise the actual temperature and counterclockwise to lower it.

Can it do SMD rework and normal soldering?

Yes. The hot air gun handles SMD rework and heat-shrink work, and the iron handles through-hole and general soldering.

What comes in the kit?

The station combines a hot air gun and a soldering iron on one base. Check the listing for the included nozzles, tips and accessories, since the description does not itemize them.

Is it a good choice for a beginner?

It works for learning, but expect to read the calibration steps and get used to two different temperature controls. A single-function station is simpler to start with.

lesen 2 in 1 Hot Air Rework Soldering Iron Station Kit

Best price now

$46.79at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

lesen 2 in 1 Hot Air Rework Soldering Iron Station Kit

Best price now

$46.79at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $46.79 at Walmart on Nov 10.

Our take on the lesen 2 in 1 Hot Air Rework Soldering Iron Station Kit

The LESEN 2 in 1 is a combined hot air rework gun and soldering iron station in one bench unit. The hot air side has a digital display and push-button temperature setting with a calibration routine; the iron side uses a scale knob instead of the display. It suits hobbyists and repairers who want both tools on one base for SMD rework and through-hole soldering. Against single-function stations it saves bench space, but the split control scheme and the calibration steps add a learning curve that simpler rivals avoid.

Best forHobbyists doing SMD rework and general soldering on one benchPhone, console and small-board repairBuyers who want hot air and an iron in one unitOccasional users who don't need a premium brand station

Pros

Hot air gun and soldering iron share one base and one power connection
Digital display with push-button temperature setting for the hot air gun
Both tools have documented temperature calibration routines
Scale knob gives quick, visible iron temperature adjustment
Covers SMD rework and through-hole soldering with one purchase

Cons

Display shows only the hot air temperature, not the iron's
Iron temperature is set by a knob scale, so it is less precise to read
Calibration needs a screwdriver and a multi-step procedure
No stated wattage, airflow or temperature range to compare against rivals

lesen 2 in 1 Hot Air Rework Soldering Iron Station Kit prices at every store

WalmartNew
In stockSold by lesenReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$46.79Free shippingChecked Nov 10
Visit Walmart

About the lesen 2 in 1 Hot Air Rework Soldering Iron Station Kit

This is a 2-in-1 rework station that combines a hot air gun and a soldering iron. The LED display shows the temperature of the hot air gun only. It does not show the iron's temperature. The iron is controlled with a scale knob, so you can set the temperature from the markings on the knob.

The soldering iron has a lead-free tip that conducts heat quickly. The handle has a non-slip grip. A metal holder stores the iron.

Both tools can be calibrated if the actual temperature is off. The hot air gun is calibrated from the control panel buttons within a range of -99°C to 99°C. The soldering iron is calibrated by turning a screw with a small screwdriver. Clockwise raises the actual temperature and counterclockwise lowers it.

Type: 2-in-1 hot air rework and soldering iron station
Display: LED, shows hot air gun temperature only
Iron control: Scale knob
Iron tip: Lead-free
Iron holder: Metal
Handle: Non-slip
Hot air calibration: -99°C to 99°C, set with the up and down temperature buttons
Iron calibration: Screw adjustment on the control panel, using a small screwdriver

Questions and answers

Does the display show the soldering iron temperature?: No. The digital display shows only the hot air gun temperature. The iron is set with a scale knob on the control panel.
How do I calibrate the hot air temperature?: Hold the down arrow on the heat gun panel, switch on the heat gun, and release when CAL appears. The screen shows 000, then you offset the reading between -99 and 99 degrees with the two adjustment buttons.
How is the soldering iron calibrated?: Insert a small screwdriver into the second hole under the CAL logo. Turn clockwise to raise the actual temperature and counterclockwise to lower it.
Can it do SMD rework and normal soldering?: Yes. The hot air gun handles SMD rework and heat-shrink work, and the iron handles through-hole and general soldering.
What comes in the kit?: The station combines a hot air gun and a soldering iron on one base. Check the listing for the included nozzles, tips and accessories, since the description does not itemize them.
Is it a good choice for a beginner?: It works for learning, but expect to read the calibration steps and get used to two different temperature controls. A single-function station is simpler to start with.
Where is the lesen 2 in 1 Hot Air Rework Soldering Iron Station Kit cheapest?: At Walmart, for $46.79, as of our latest check.

More soldering stations

48W Digital Temperature Adjustable ESD Safe Soldering Iron Station

MAGST2006 (80W)

AT-989D 65W Digital Soldering Station ESD Safe ATTEN