
Lindy Int.SATA III Cable with 90deg Plug, 0.7m
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
This is a 0.7 m SATA data cable with one straight and one right-angled 7-pin connector, built for linking a motherboard to a hard drive, SSD or optical drive. The 90° plug helps in tight cases where a straight connector would foul a side panel or another component. It is rated for SATA III and works with older SATA I and II drives. The shielded twin-ax construction with multiple grounds is a step above basic ribbon cables, though it is a plain data cable with no latching clip mentioned.
In stockShips from the UK · duties may applyReturn policy
A SATA III data cable that connects a motherboard to a hard disk drive, solid-state drive or optical drive. It is 0.7 m long and has a 7-pin SATA data connector at each end, one straight and one right-angled at 90°.
The cable is constructed with shielded twin-ax conductors and multiple ground connections. It is red.
It works with SATA III and is backwards compatible with SATA I and SATA II. The operating and storage temperature range is approximately -20 to 65°C.
It checks today's price at every store, compares the alternatives and answers in about a minute.