It checks today's price at every store, compares the alternatives and answers in about a minute.
The Longer LK4 X is an FDM 3D printer with a 220 x 220 x 250 mm build volume, a direct dual-gear extruder, and 16-point automatic bed leveling. It comes 95% pre-assembled and runs open-source firmware on a 32-bit board with TMC2208 silent stepper drivers. It suits beginners and hobbyists who want to print flexible filaments like TPU without upgrading the extruder. Compared with other budget printers, it offers a direct extruder and silent board that are often missing at this level, but its single-bed design and lack of enclosure limit advanced materials.
Availability unknown
Out of stock
Lowest price we've seen: $279.99 on Nov 17 at Longer. Tracked across 2 stores since Nov 17.
Owners appreciate the direct extruder for printing TPU and the automatic leveling that simplifies setup. Many find the printer quiet and reliable for the price, though some report needing to fine-tune the Z-axis and note the lack of an enclosure for ABS.
The Longer LK4 X is an FDM 3D printer with a build volume of 8.66" x 8.66" x 9.84" (220 x 220 x 250 mm). A direct dual-gear extruder with a 5:1 reduction ratio feeds filament, and the printer works with PLA, TPU, ABS, PETG and Wood. It prints at speeds up to 180 mm/s with a printing accuracy of ±0.1 mm and layer thickness from 0.1 to 0.4 mm.
The hot bed has 16-point automatic leveling that compensates for unevenness, and the build plate is a flexible PEI-coated steel sheet: filament adheres without adhesive, and bending the sheet releases the finished model. A dual fan blower cools extruded filament to limit deformation and stringing, and manual X/Y belt tensioners adjust belt tension. The hot bed reaches up to 100°C and the nozzle up to 250°C.
A 32-bit open-source motherboard with four TMC2208 silent chipsets runs the machine, and a 4.3 inch full-color touch screen replaces knobs and dot-matrix displays. Printing resumes after a power loss or filament run-out, with the process recorded and detected in real time. The printer arrives 95% pre-assembled and takes six steps to finish assembly, connects by TF card or USB, and draws 320 W.





