This is a combination bench sander that works as an oscillating spindle sander and as a belt sander. A 500W motor drives both modes. It sands wood, plastics and soft metals.
In spindle mode the drum turns at up to 2000 RPM and oscillates 58 times per minute with a 5/8 in stroke. In belt mode the 4 in x 24 in belt runs at up to 1575 FPM. Five sanding sleeves are included, sized 1/2 in, 3/4 in, 1 in, 1-1/2 in and 2 in, for curves, contours and interior cuts.
The worktable tilts from 0° to 45° for angled sanding. A 1-17/32 in dust port connects to a vacuum system. The machine runs on AC power.
- Motor
- 500W
- Power source
- AC
- Current
- 5 A
- Modes
- Oscillating spindle and belt sander
- Spindle speed
- Up to 2000 RPM
- Belt speed
- Up to 1575 FPM
- Oscillations
- 58 OPM
- Stroke
- 5/8 in
- Belt size
- 4 in x 24 in
- Sanding sleeves
- 5: 1/2 in, 3/4 in, 1 in, 1-1/2 in, 2 in
- Table tilt
- 0° to 45°
- Dust port
- 1-17/32 in
- Grit type
- Medium
- Grit number
- 1
- Materials
- Wood, plastics, soft metals
- In the box
- 5 sanding sleeves, 4 in x 24 in sanding belt, tilting table, hardware