This is a 10-inch cordless dual-bevel sliding compound miter saw that runs on two 18V LXT batteries for 36V power. It has a brushless motor with automatic speed change technology, which adjusts cutting speed and torque under load. A direct-drive gearbox with soft start gives smooth start-ups with no belts to slip or replace, and an electric brake is included.
Two steel rails give a single slide-glide action. They also reduce the saw's footprint, so it can sit flush against a wall. A linear ball bearing system, a large aluminum base and an integrated 4-3/4" tall fence support accurate miter and bevel cuts. The saw has a 60T carbide-tipped blade and a built-in laser that shows the line of cut whether or not the blade is turning. The laser has an on-off switch and micro-adjustments for left-of-blade or right-of-blade cutting.
The bevel lock is at the front of the saw, the miter angle locks and unlocks with a 90-degree turn of the knob, and a one-touch slide lock is included. The handle has a rubberized soft grip. Dust collection works with the included dust bag or with a vacuum.
- Blade
- 10 in., 60T carbide-tipped
- Power
- Two 18V LXT lithium-ion batteries (36V)
- Motor
- BL brushless motor with direct-drive gearbox and soft start
- Miter range
- 0° to 60° left and right
- Miter stops
- 0°, 15°, 22.5°, 31.6°, 45° and 60° (left or right)
- Bevel range
- 0° to 48° left and right
- Vertical capacity
- 5-1/4 in.
- Crown molding
- Up to 6-5/8 in. nested
- Crosscut capacity
- 2-13/16 in. x 12 in. at 90°; 2-13/16 in. x 8-1/2 in. at 45°; crosscuts a 4 x 12 at 90°
- Fence height