Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Makita SP6000J2 is a corded 165mm plunge saw for guided, splinter-free cuts in sheet goods and trim. It cuts 55mm deep at 90° and 39mm at 45°, holds speed under load with electronic control, and can cut as close as 18mm to a wall. The kit adds a 1.5m guide rail and a MakPac case, so it competes with other rail-guided plunge saws on cut depth and dust control rather than raw power. It suits carpenters, kitchen fitters and serious DIYers cutting worktops, doors and panels; the cord and 91 dB(A) noise are the main trade-offs against cordless rivals.
In stockShips from the UK · duties may apply
Owners of the SP6000J2 rate it as a solid, accurate rail saw for the money, with clean cuts and good dust collection when hooked to a vacuum. Common complaints are noise and the cord limiting movement on site.
The Makita SP6000J2 is a 240V plunge saw with a 165mm blade. It comes with a 1.5m guide rail and a MakPac protective case. Electronic speed control keeps the speed constant under load, and the tool is double insulated.
The saw can cut as close as 18mm to a wall. A depth stopper allows a preliminary cut at a depth of 2mm for splinter-free cutting. A tip-resistant lever stops the saw from falling toward the blade case when slid. The handles have non-slip rubberized grips with a contoured shape.
The saw connects to a vacuum cleaner, and sawdust is ejected backward. To change the blade, a lever locks it in the replacement position. The hex wrench works through a hole in the casing and is stored in the handle afterward.
