
MB Slot BBR Ferrari F430 1/32 Slot Car Kit SL001
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a 1/32 scale slot car kit built by MB Slot with BBR: a Ferrari F430 Challenge racer in kit form. It uses an inline motor in a long cage screwed to its mount, a 9-tooth brass pinion driving a 26-tooth crown on a screwed aluminum hub, and brass bearings front and rear. The front axle height is adjustable, the guide is screwed in with wide angular clearance, and two small neodymium magnets sit ahead of the motor. At 96 g and 14.8 cm long it is a light, tunable club racer for builders who want to assemble, adjust and tune rather than run a sealed car out of the box.
In stockReturn policy
This is a 1/32 scale slot car kit of the Ferrari F430 Challenge, supplied as parts to assemble. It is built around an inline motor that sits in a long cage and is screwed onto its support.
The drivetrain uses a 9-tooth brass pinion and a 26-tooth crown on a screwed aluminum hub. The rear pin runs on brass bearings, and the front axle also runs on brass bearings with height adjustment.
Two cylindrical neodymium magnets, 5 x 3 mm, sit in front of the motor. The motor-guide wire is very flexible and has a silicone sheath, and the screwed guide has large angular clearance. The car measures 14.8 cm long and 7 cm wide at the ends of the mirrors, with a 10.3 cm wheelbase from the guide shaft to the rear axle and a 5.9 cm rear track width, and it weighs 96 g.