
MCP1650-V00AE30 QSFP/CX7 Cable — 200G QSFP56 Passive DAC, 0.5m
Best price now
Prices are checked against each store and labelled with when.
Finding cheaper alternatives
Price facts
- Lowest price today: $79.00 at Resilient Tec (checked Nov 22, 2026).

Prices are checked against each store and labelled with when.
The MCP1650-V00AE30 is a 0.5 m passive direct-attach copper cable with QSFP56 connectors on both ends, rated for 200G. It is EEPROM-coded for NVIDIA DGX Spark and GB10 systems, so two DGX Spark units can link directly through their ConnectX-7 QSFP ports without a switch, transceivers or adapters. Passive copper at this length keeps latency low and power draw negligible, which is what most two-node Spark setups need. It is a single cable, so three- or four-node clusters need one per link plus a switch.
In stockReturn policy
This is a 0.5 m (1.6 ft) passive direct attach copper cable with QSFP56 connectors on both ends, rated for 200G. It connects NVIDIA DGX Spark systems directly through their ConnectX-7 QSFP ports, with no switch, transceivers or adapters needed. The EEPROM is coded for DGX Spark and GB10 systems.
The cable is 30 AWG twinax and has no active components, so it draws under 0.1 W. Its 200G rating runs over 4 x 50G PAM4 lanes, matching the up to 200 Gb/s per port of the ConnectX-7 port. It meets QSFP56 MSA, IEEE 802.3bj, IEEE 802.3cd and RoHS.
Two units link port to port with one cable and no switch. Three units form a ring using both QSFP ports on every unit, also without a switch, while four or more units connect one cable per unit into a QSFP-DD switch port pinned to 200G. The ports run in Ethernet mode with RoCE, not InfiniBand. The same cable works on the Dell Pro Max with GB10, HP ZGX Nano AI Station, ASUS Ascent GX10 and Lenovo ThinkStation PGX, though the port's location and labeling differ by chassis, so confirm it in the vendor manual before cabling.
It checks today's price at every store, compares the alternatives and answers in about a minute.