Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The MediTub 2952LWD is a 29" x 52" walk-in bathtub with an inward-swinging door and a 6" threshold, so you step in, sit on the molded 17" seat and close the door before the bath fills. It pairs 16 air bubble injectors on a 1 HP blower with 6 directional water jets on a 1 HP pump, each with its own button, plus a friction heater that keeps the water warm without drawing extra power. A 33" soak depth, grab bar and textured floor round out a tub aimed at aging in place and ADA remodels. Against cheaper air-only walk-ins it adds a real hydro massage system; against larger combo tubs it trades soaking length for a compact footprint that fits smaller bathrooms.
In stockReturn policy
The MediTub 2952LWD is a 29" x 52" walk-in bathtub in white with a dual whirlpool and air massage system. The drain is on the left, and the pump and blower are on the right. You open the inward-swinging door, step over a 6" threshold, sit on a molded 17" high seat and close the door before the tub fills.
The tub fills to a 33" soaking depth from drain to overflow. 16 air bubble injectors run on a 1 HP blower, and 6 adjustable water jets run on a 1 HP pump. Each system has its own button, so you can run them together or one at a time. A friction heater keeps the water warm and needs no extra power. Fill the tub at least 2" above the highest jet before switching the jets on.
The shell has a built-in grab bar, a slip-resistant textured floor and an ADA compliant molded seat. The door closes on a GE water seal, and a door drain with a check valve clears water from the door channel after each bath. A chrome turn knob inside the tub works the cable-operated waste and overflow. The tub sits on a stainless steel frame with 8 support points and adjustable leveling feet. It is designed for alcove installation, and an 8" extension kit is included so it fills a standard 60" alcove. Removable front access panels give access to the pump and blower. Jet, pump and blower positions are set at the factory and cannot be moved.
