The Metabo HPT NV75A5M is a pneumatic coil nailer for siding, light framing and sheathing work. It drives fasteners up to 3 in. long and 0.131 in. in diameter. It accepts both wire-collated and plastic-collated coil nails.
It weighs 5.7 lbs. A side-load, tilt-bottom magazine makes reloading quick. Tool-less depth adjustment lets you countersink or flush drive into a variety of materials. A no-mar nose cap protects the work surface from accidental marks, and an open nose design helps clear jams.
Selective actuation switches between sequential and contact nailing. The air deflector adjusts 360 degrees to direct the exhaust in any direction. The tool has a rubber grip and an aluminum rafter hook, and it meets US safety standards for pneumatic nailers.
- Wire nails
- 16-degree wire coil, 1-3/4 in. to 3 in. long, .099 in. to .131 in. diameter
- Plastic nails
- 15-degree plastic coil, 1-3/4 in. to 2-1/4 in. long, .090 in. to .099 in. diameter
- Actuation
- Selective (sequential/contact)
- Magazine
- Side load, tilt bottom
- Nail capacity
- 200 to 300
- Operating pressure
- 70 to 120 PSI
- Depth adjustment
- Tool-less
- Exhaust
- Adjustable exhaust port
- Jam clearing
- Open nose design
- Dry-fire lockout
- No
- Grip
- Rubber
- Dimensions
- 10-11/16 in. L x 5-3/16 in. W x 13-3/8 in. H