Does the 2836-20 come with a battery?

No. It is a bare tool, so you need a separate M18 battery and charger. It is aimed at people already on the M18 platform.

How does it compare with Milwaukee's older M18 multi-tool?

The FUEL 2836-20 adds a brushless motor, a higher 10,000 to 20,000 OPM range and a 4.2-degree oscillation angle, which Milwaukee says cuts faster than earlier models.

Can it cut nail-embedded wood?

Milwaukee rates it for nail-embedded material and demo work, and owners report it handles those cuts without bogging down.

Does it accept standard oscillating blades?

It uses Milwaukee's tool-free blade interface. Check that an accessory is listed as compatible with the 2836-20 before buying.

Is it good for sanding?

Yes. The variable speed range and low vibration suit detail sanding, and sanding pads attach through the same tool-free change system.

What do buyers say about the Milwaukee 2836-20 M18 FUEL Oscillating Multi-Tool?

Rated 4.8 out of 5 from 1,372 ratings.

Where can I buy the Milwaukee 2836-20 M18 FUEL Oscillating Multi-Tool?

16 stores we checked sell it, including Walmart, Amazon, Home Depot, Ace Hardware, Tool Nut.

Milwaukee 2836-20 M18 FUEL Oscillating Multi-Tool

Q: Where is the Milwaukee 2836-20 M18 FUEL Oscillating Multi-Tool cheapest?

At Walmart, for $225.00, as of our latest check.

Best price now

$225.00at WalmartChecked 11 h ago

Compared across 15 stores. Prices are checked against each store and labelled with when.

Visit Walmart

What reviewers say

4.8 / 51,372 ratings

Owners rate it 4.8 out of 5 across more than 1,300 ratings, praising its cutting speed and low vibration. Complaints are mostly about bulk and the extra cost of batteries and blades.

What people mention

Cutting speedPraisedOwners say it cuts quickly through wood and nail-embedded material without bogging down.
VibrationPraisedReviewers report noticeably less hand fatigue on long cuts and sanding passes.
Blade changesPraisedThe tool-free accessory change is called fast and convenient mid-task.
Size and weightCriticisedSome owners find it heavier and bulkier than compact 12V multi-tools.
Cost of ownershipMixedBuyers note the bare-tool format and blade wear add up over time.

About the Milwaukee 2836-20 M18 FUEL Oscillating Multi-Tool

The Milwaukee M18 FUEL 2836-20 is a cordless oscillating multi-tool for cutting, scraping, sanding, and plunge work. It has a POWERSTATE brushless motor and runs at 10,000 to 20,000 oscillations per minute with a 4.2 degree oscillation angle. It is a bare tool and runs on M18 batteries.

A 10-setting dial sets the speed for the material and the cut. The Auto-Load feature starts the tool slowly for a more precise entry into the cut, then ramps up once the accessory is under load. Vibration dampening technology reduces full tool vibration, and the tool-free blade change speeds up accessory swaps.

The housing is reinforced nylon. The tool is 12.17 inches long and weighs about 2.58 pounds, so it fits in tight spaces. An integrated 180 degree LED light helps in low-light work areas. REDLINK PLUS intelligence manages communication between the tool and the battery.

Model

2836-20

Power source

Cordless

Battery platform

M18, compatible with all Milwaukee M18 batteries

Motor

POWERSTATE brushless

No-load speed

10,000 to 20,000 OPM

Oscillation angle

4.2 degrees