What is 2D Target ID?

It plots each target on a screen with conductive and ferrous axes, so you see both how well a target conducts and how much iron it carries. That helps you judge difficult targets before digging.

Is the MANTICORE good for beginners?

It is aimed at experienced hunters. The multi-frequency engine and 2D ID screen reward practice, but new users should expect a learning period with the menus.

What coils does it use?

This configuration includes the M11 11-inch Double-D round coil with a skidplate. Other MANTICORE-compatible coils can be fitted for different ground and target sizes.

Does it work on wet sand and in saltwater?

Yes. It is a simultaneous multi-frequency detector built for beach hunting, and owners report stable behavior on wet sand. The coil is waterproof; check the control pod rating before submerging it.

The MANTICORE with a three-piece carbon fiber shaft, the M11 coil with skidplate, ML 105 wireless headphones with audio and charging cables and a hard case, plus the PRO-FIND 40 pinpointer with holster, lanyard and 9V battery.

How does it compare with the Equinox series?

The MANTICORE adds the 2D Target ID screen and more target information, while the Equinox line is simpler and lighter. Choose the MANTICORE if you want more detail on difficult targets.

Minelab MANTICORE Metal Detector with PRO-FIND 40 Pinpointer

Q: Where is the Minelab MANTICORE Metal Detector with PRO-FIND 40 Pinpointer cheapest?

At Adorama, for $1,499.00, as of our latest check.

Q: What do buyers say about the Minelab MANTICORE Metal Detector with PRO-FIND 40 Pinpointer?

Rated 4.9 out of 5 from 65 ratings.

Q: Where can I buy the Minelab MANTICORE Metal Detector with PRO-FIND 40 Pinpointer?

20 stores we checked sell it, including Detector Warehouse, Detector Experts, Sports 365, Detector Hero, Kellyco.

Best price now

$1,499.00at AdoramaChecked 1 h ago

Compared across 20 stores. Prices are checked against each store and labelled with when.

Visit Adorama

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

What reviewers say

4.9 / 565 ratings

Owners rate the MANTICORE very highly, praising its target information, depth and stability across ground types. Most criticism centers on the learning curve and the amount of menu work.

What people mention

Target IDPraisedOwners say the 2D Target ID map helps them decide whether a mixed signal is worth digging.
DepthPraisedUsers report strong depth on coins and relics compared with their previous detectors.
Learning curveCriticisedBeginners and newcomers to the brand say the settings and screen take time to understand.
Beach usePraisedHunters report stable operation on wet sand and saltwater beaches.
BuildPraisedOwners like the carbon fiber shaft and the overall solid feel of the detector.

About the Minelab MANTICORE Metal Detector with PRO-FIND 40 Pinpointer

The Minelab MANTICORE is a metal detector that uses Multi-IQ+ simultaneous multi-frequency technology and a two-dimensional target display. It is built for coin, relic, jewelry and beach hunting, and for areas where coins, iron and aluminum lie together. This bundle adds the Minelab PRO-FIND 40 pinpointer.

The 2D Target ID Map plots conductivity from 0 to 99 across the map and ferrous properties up the side. Each detection leaves a trace that fades after about 5 seconds. The trace is affected by the target's composition, orientation and depth, the swing speed and the frequency, so it works best combined with the audio and the target ID. The detector also has a pinpoint button and a 5-level depth indicator. Minelab states that Multi-IQ+ delivers up to 50% more power than the Equinox series. Depth still depends on the target, the coil, the ground and the settings.

The PRO-FIND 40 is a handheld pinpointer for recovering targets from the hole. It has five sensitivity levels, Ferrous Tone ID, vibration, an LED flashlight and DIF (Detector Interference Free), which reduces signal noise from nearby detectors. It is waterproof to 3 meters (10 feet).

Detector

Minelab MANTICORE with three-piece carbon fiber shaft

Coil

M11 11 in round Double-D coil with skidplate

Headphones

ML 105 low-latency wireless headphones with 3.5 mm audio cable, charging cable, instruction manual and hard case

Technology

Multi-IQ+ simultaneous multi-frequency, 2D Target ID Map

Pinpointer

Minelab PRO-FIND 40 with holster, lanyard and 9V battery (Minelab part 3226-0005)

Pinpointer features

5 sensitivity levels, Ferrous Tone ID, vibration, LED flashlight, DIF