This is a monoblock car audio amplifier with a Class D design and dual discrete drive stages. It has a Mosfet PWM power supply and a glass epoxy PCB. A built-in Bluetooth audio interface lets it play audio wirelessly.
Controls include an electronic crossover with a low pass filter, bass boost, subsonic filter and phase adjustment. A remote control is included. The amplifier has chrome RCA inputs, a custom terminal block for speaker connection and L/R line outputs.
Protection includes thermal, overload and short circuit protection, plus soft turn on and off. The amplifier has 5-way protection circuitry. LED indicators show power and protection status.
- Type
- Class D monoblock amplifier
- Power at 4 ohm
- 1 x 200 W RMS
- Power at 2 ohm
- 1 x 350 W RMS
- Power at 1 ohm
- 1 x 500 W RMS; 1 x 1000 W max
- Power test
- Output power rated at 14.4 V DC, 50 Hz
- Frequency response
- 10 Hz to 250 Hz (±3 dB)
- Input impedance
- 20K ohms
- Input sensitivity
- 0.2 V to 6 V
- S/N ratio
- >90 dB
- THD
- <0.01%
- Low pass filter
- 50 Hz to 250 Hz
- Subsonic filter
- 10 Hz to 50 Hz
- Phase
- 0° to 180°
- Bass boost
- 0 to 18 dB at 50 Hz
- Connectivity
- Bluetooth; chrome RCA inputs; L/R line outputs
- Speaker connection
- Custom terminal block
- Fuse
- 2 x 25 A
- Dimensions
- 9.21 x 8.13 x 2.28 in (L x W x H)
- In the box
- Invincible Series amplifier, high to low converter, remote control, telephone wire, 2 x 25 A fuses, 4 tapping screws (0.16 x 0.63 in), 2 tapping screws (0.12 x 0.47 in), 4 F4.0 spacers, 2 F3.0 spacers