What nozzle temperature should I use?

Most users print SUNLU PLA around 200–210 °C on the nozzle and 50–60 °C on the bed. Start in that range and adjust for your printer.

Does it fit a standard printer?

It is 1.75 mm filament on a 1 kg spool, the common size for desktop FDM printers. Check that your spool holder accepts a 1 kg roll.

No. PLA softens at fairly low heat, so parts left in a hot car or direct sun can deform. Use PETG or ASA for those jobs.

No. PLA prints well in open air and actually benefits from cooling, so an enclosure is not required.

PLA is brittle, especially if left under tension or in a dry, cold room. Store spools sealed and avoid sharp bends in the filament path.

Choose PLA for easy, detailed prints and prototypes. Pick PETG when you need heat resistance, toughness or outdoor use.

At SUNLU, for $5.81, as of our latest check.

$5.81at SUNLUChecked Nov 8

Prices are checked against each store and labelled with when.

It checks today's price at every store, compares the alternatives and answers in about a minute.