Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The MRCOOL DIY 5th Gen 4-Zone is a ductless mini split with one 27,000 Btu outdoor condenser feeding four indoor heads: three 6K units and one 12K unit. It is rated 23 SEER2 and runs on inverter-driven output, so it modulates capacity instead of cycling on and off. It works from -13 F to 122 F, has a Gold Fin coated condenser, and connects to SmartHVAC, Alexa and Google Assistant. The DIY label means pre-charged line sets and quick-connect fittings, so a handy homeowner can install it without a vacuum pump or brazing torch. That puts it ahead of most multi-zone systems, which need a licensed installer, and its efficiency beats typical single-zone budget units. The trade-off is that four zones share one condenser, so all four heads run on the same refrigerant circuit and the same mode.
In stockReturn policy
Owner feedback on the MRCOOL DIY line is generally positive on ease of install and quiet operation, with the quick-connect lines cited as the main reason people choose it over conventional systems.
The MRCOOL DIY 5th Gen 4-Zone is a ductless mini split system that heats and cools four areas independently. It has a 27,000 Btu capacity and a 23 SEER2 rating. The indoor units are sized 6K, 6K, 6K and 12K.
The inverter-driven design adjusts output as needed, and the system uses less energy than conventional systems. The indoor blowers are quiet and have multiple speeds that scale to the load. The outdoor condenser has a corrosion-resistant Gold Fin coating. In heating mode, defrost control logic protects performance in cold weather.
The system can be controlled with SmartHVAC, Alexa or Google Assistant. You can monitor usage trends and set schedules. Sleep mode and auto-adjusting fan speed save energy. The system returns to its last settings after a power failure.
