This is a 3-in-1 device that combines a car jump starter, a digital air compressor and a power bank. The jump starter delivers a 3000A peak current for 12V vehicles, including engines up to 9.0L gas or 8.0L diesel. It works in temperatures from -4°F to 140°F (-20°C to 60°C).
Ten intelligent protections guard against problems such as overcharging, reverse polarity, short circuits and sparks. A honeycomb heat dissipation design improves thermal performance by up to 30%.
The built-in tire inflator reaches 150 PSI and shows real-time pressure and preset values on an LCD. Two USB outputs charge mobile devices. A 400-lumen LED flashlight has four modes: flashlight, strobe, SOS and red. A separate LCD screen shows battery life and charging status.
- Model
- F11
- Peak current
- 3000A
- Vehicle compatibility
- 12V vehicles; up to 9.0L gas or 8.0L diesel engines
- Operating temperature
- -4°F to 140°F (-20°C to 60°C)
- Safety
- 10 intelligent protections (overcharging, reverse polarity, short circuits, sparks, etc.)
- Heat management
- Honeycomb heat dissipation design
- Max pressure
- 150 PSI
- Air flow rate
- 35 L/min
- Inflator display
- LCD with real-time pressure and preset values
- Pressure units
- PSI, BAR, KPA
- USB outputs
- 2, including 1 x Quick Charge 3.0 port
- Input
- Type-C
- Flashlight
- 400 lumens; 4 modes (Flashlight, Strobe, SOS, Red)
- Flashlight runtime
- Up to 48 hours on a full charge
- Display
- LCD screen for battery life and charging status
- In the box
- Jump starter with air compressor, heavy-duty jumper cables (smart clamps), 3 x air nozzle adapters, USB-C charging cable, user manual
- Care
- Fully charge before first use. Recharge every 3-6 months, even if not in use. Store in a cool, dry place away from direct sunlight and extreme temperatures. Wipe the exterior with a soft, damp cloth;
- Usage notes
- Monitor pressure on the LCD and do not exceed the recommended PSI. Inspect jumper cables and air hose for wear or damage, and replace if necessary.