This is a set of two uncovered humbucker pickups for electric guitar, one for the neck position and one for the bridge. Both use Alnico 5 magnets. Two rows of adjustable hexagonal pole pieces let the player set each string's attack more precisely.
The pickups have a nickel silver baseplate and a PC bobbin. They are wired with 4-conductor shielded cable. The neck pickup measures 7.5K and the bridge pickup 16.6K. The set is intended for rock, metal and other modern styles, with a wide range of high and low frequencies.
- Type
- Uncovered humbucker, neck and bridge set
- Magnet
- Alnico 5
- Pole pieces
- Dual in-line adjustable hexagonal screws
- Baseplate
- Nickel silver
- Bobbin
- PC
- Wiring
- 4P Shield
- Resistance
- Neck 7.5K, bridge 16.6K
- Inductance
- Neck 3.8H, bridge 8.0H
- Tolerance
- 0.5K for single coil, 1K for humbucker
- Pole spacing
- Neck 50mm (1-31/32 in), bridge 52mm (2-3/64 in)
- Mounting holes
- 78mm (3-5/64 in) apart
- In the box
- Neck and bridge pickups, mounting accessories
- Note
- Resistance varies with temperature and humidity: usually higher in hot, dry weather and lower in cold, wet weather. The included screws may not fit every setup, so use your own if possible.