Bluetooth Audio Power Amplifier, with ACTIVE Subwoofer Output 4.1 Channel Support 2 Pairs Speakers 1 Subwoofer, Wireless HiFi Stereo Subwoofer Amplifier for Home & Car S-299 Parameters Type: 4.1 Channel Power Amplifier Input: Bluetooth / 3.5mm AUX / Headphone Jack / USB port / SD & TF Card Impedance: 4-8 ohm Power Output: 4 x 40W (RMS), 800W Peak Power Work Voltage: AC 110-240V Power Adapter: DC 12V 5A SNR: 80db Size: 17.6 x 14.7 x 4.3cm (6.9 x 5.8 x 1.7 inches) Weight: 515g (1.14 Pounds) NOTE for Volume Control of Subwoofer: For those looking to buy this amp to use with an active subwoofer, there is a note. It can ONLY be controlled with the remote, if your active subwoofer does not have a separate volume control. NOTE for the Remote Control: The remote only controls parts of all functions, not for full control. NOTE for Bluetooth Range: Please keep the distance within 16.4ft/5m between the device and amplifier without any wall blocking. But if you are connecting whith TV or PC devices, please keep the distance within 6.5ft/2m. NOTE for Music Playback after the Amp Restart If you power off the amp with the remote it will play MP3 from where you stopped, but if you power it off with unpluging the power supply then it starts from its beginning. NOTE for TV connection: You could connect the Facmogu Audio Amplifier to your TV through audio cable. When connecting through the audio cable, please assure that the input selector has been adjusted to the line mode for proper use. Package Includeds: 1 x Audio Power Receivers 1 x Power Adapter 1 x Remote Control 1 x User Manual