MW HRP-600-24 PFC Switching Power Supply
Where to buy
No store is showing a current price right now. The stores below sell it; ask the agent to check today's prices.
Prices are checked against each store and labelled with when.
Ask our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.
About the MW HRP-600-24 PFC Switching Power Supply
MW HRP-600-24 is an enclosed, single-output AC/DC switching power supply rated for 24VDC at 27A and 648W output power.
The HRP-600 platform combines universal AC/DC input, active PFC, a built-in cooling fan with ON/OFF control, constant-current limiting, a DC OK signal, and remote-sense connections for qualified installed equipment.
Technical details below were checked against the MW English series datasheet. Confirm final wiring, protection coordination, enclosure design, cooling, and derating against the datasheet before system integration.
Features
24V regulated output - Rated for 24VDC at 27A, with 648W rated output power.
Universal AC/DC input - Accepts 85-264VAC or 120-370VDC at 47-63Hz according to the English datasheet.
Active PFC - The datasheet lists PF above 0.93 at 230VAC and above 0.99 at 115VAC under full load.
Cooling fan control - Built-in fan turns on at approximately 35 plus or minus 15 percent load or when RTH2 is at or above 50C. Confirm finished-equipment airflow and derating.
Remote sense and DC OK - Provides CN100 remote-sense connections and a DC OK signal.
Constant-current limiting - Built-in overload limiting is specified at 105-135% rated output power with automatic recovery after fault removal.
Protection functions - Includes short-circuit, overload, over-voltage, and over-temperature protection.
Warranty - MW lists a 5-year warranty for this series.
Specifications
Product
MW HRP-600-24 switching power supply
Series
HRP-600
Rated output
24VDC, 27A
Rated power
648W
Output voltage adjustment range
21.6-28.8V
Ripple and noise