It checks today's price at every store, compares the alternatives and answers in about a minute.
The Navien NPE-180A2 is a condensing gas tankless water heater rated at 150,000 BTU/h with a 0.95 UEF and ENERGY STAR certification. Its standout feature is ComfortFlow: a built-in recirculation pump and buffer tank that deliver near-instant hot water without an external pump or dedicated recirculation line. It modulates from 10,000 to 150,000 BTU/h and delivers 6.5 GPM at a 45°F rise, or 4.3 GPM at 67°F for cold incoming water. It suits whole-house retrofits and homes that want recirculation without added hardware; the NPE-180S2 matches its input but drops the pump and buffer tank, so the A2 is the pick when waiting for hot water is the complaint.
In stockReturn policy
Owners of the NPE-A2 series praise the fast hot water from ComfortFlow and the quiet, modulating operation. Installers note the built-in pump simplifies retrofits. Complaints center on condensate handling and the need for proper gas and vent sizing.
The Navien NPE-180A2 is a condensing gas tankless water heater with a maximum input of 150,000 BTU/h and a 0.95 UEF. It delivers 6.5 GPM at a 45°F temperature rise and 4.3 GPM at a 67°F rise, and modulates down to 10,000 BTU/h. The A2 version has Navien's ComfortFlow recirculation pump and buffer tank built in; the NPE-180S2 has the same input without the pump and buffer tank. It mounts indoors or outdoors, runs on natural gas or propane, and vents in 2" or 3" pipe.
Key Features
• Modulating input from 10,000 to 150,000 BTU/h on natural gas or propane
• 0.95 UEF; ENERGY STAR certified
• ComfortFlow built-in recirculation pump and buffer tank
• Hot water flow: 8.4 GPM at a 35°F rise, 6.5 GPM at 45°F and 4.3 GPM at 67°F
• Minimum activation flow 0.5 GPM; Navien also lists a < 0.01 GPM option
• Primary and secondary stainless steel heat exchangers
• Cabinet 17.3" W x 27.4" H x 13.2" D, 73 lbs
Applications
• Whole-house domestic hot water; size on the 67°F figure where incoming water is cold
• Homes that want hot water recirculation without adding an external pump
• Replacing a storage tank water heater where a gas line, vent route and condensate drain are available
• Residential and commercial hot water loads within the rated flow
Before You Order
• Gas type: listed for natural gas and propane (NG/LP convertible). Confirm which gas the unit is set up for, and have any conversion done by a licensed installer following the Navien manual.
• Gas line: 3/4" gas connection. The meter and line must supply the full 150,000 BTU/h; supply pressure is 3.5" to 10.5" WC on natural gas and 8" to 13" WC on propane.
• Venting: 2" or 3" PVC, CPVC, approved polypropylene or stainless steel for intake and exhaust, 0" clearance to combustibles.
• Electrical: 120V AC, 60 Hz supply at the unit.
• Water: 3/4" cold inlet and 3/4" hot outlet; water pressure 15 to 150 PSI.
• Condensate: this is a condensing appliance and produces acidic condensate. Plan a drain line to a suitable drain, with a neutralizer where local code requires one.
• Altitude: approved to 10,100 ft on natural gas or propane; see the installation manual for high-altitude settings.
How much hot water you actually get
Navien rates every tankless unit by temperature rise, because the colder the incoming water, the less of it one burner can heat. Here is what the NPE-180A2 delivers: