The NDS 820 is a 5-inch Pro Series shallow profile channel drain for surface water drainage. Its low profile suits areas with limited depth, such as driveways, patios and pool decks. It is used in residential and commercial applications.
Each section is made of high-density polyethylene (HDPE), a chemical-resistant polymer. It is UV stabilized for long-term outdoor use and has a frost-resistant design. Sections connect with an interlocking system, and the channel works with several grate options.
To install, dig a trench slightly wider than the channel and pour a 2-inch concrete base. Set the channel sections with proper alignment and slope, and connect them using the interlocking system. Add end caps and outlets as needed, then pour concrete around the sides and leave the top exposed. Once the concrete has cured, snap the grates into place.
- Dimensions
- 5" wide x 4" deep x 39.4" long (per section)
- Material
- High-density polyethylene (HDPE)
- Load class
- Class A, pedestrian to light vehicle traffic
- Flow rate
- Up to 17.6 GPM per linear foot
- Grate materials
- Plastic, galvanized steel or stainless steel
- Chemical resistance
- Withstands most household and industrial chemicals
- Outdoor use
- UV stabilized; frost-resistant design
- Connection
- Interlocking sections