
NEMA 14 Bipolar Stepper Motor: 200 Steps/Rev, 10V, 0.5A/Phase
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
This is a NEMA 14 hybrid bipolar stepper with a 1.8° step angle, 200 steps per revolution, and 1 kg-cm (14 oz-in) of holding torque. Each coil is rated 500 mA at 10 V with 20 Ω resistance and 13.5 mH inductance, and the 5 mm D-shaft runs on two ball bearings. It suits small CNC, 3D-printer, camera-slider and robotics builds that need compact, precise positioning. Against larger NEMA 17 motors it trades torque for size and weight; against unipolar motors it needs a bipolar driver but delivers more torque per unit size.
In stockShips from the UK · priced in GBP (£22.67) · duties may applyReturn policy
This is a NEMA 14-size hybrid bipolar stepper motor. It measures 35 mm square by 28 mm, not including the shaft, and weighs 140 g. It has a 1.8° step angle and 200 steps per revolution.
Each phase draws 500 mA at 10 V and has a resistance of 20 Ω and an inductance of 13.5 mH per coil. The holding torque is 1 kg-cm (14 oz-in). The motor has four color-coded wires with bare leads: black and green connect to one coil, and red and blue connect to the other.
The output is a 5 mm D-shaft that is 21 mm long, with a section flattened by 0.5 mm, and it is supported by two ball bearings. The motor can be controlled by a pair of suitable H-bridges, one for each coil, or by a bipolar stepper motor driver. The leads are 30 cm long.
It checks today's price at every store, compares the alternatives and answers in about a minute.
