Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The LDO 57STH86 is a Nema 23 bipolar stepper with 345 oz-in of holding torque, a 1.8-degree step angle and a 3.0 A per phase current rating. It uses a 6.35 mm (1/4 inch) shaft and comes with 8 cm pre-tinned leads, so it can be soldered or fitted with connectors. It suits CNC routers, 3D printers, laser cutters and automation builds that need more torque than a Nema 17 can give. Against generic Nema 23 motors, LDO is a known name in motion hardware, and the high torque rating puts it above common 270 to 300 oz-in units of the same frame size.
In stockShips from Portugal · duties may applyReturn policy
This is a high-torque Nema 23 stepper motor made by LDO, model LDO-57STH86. It has a 1.8 degree stepping angle and a holding torque of 24.5 kg/cm (345 oz-in).
The motor is rated for 3.0 V and 3.0 A per phase. It has a 6.35 mm (1/4") shaft. Its four wires are pre-tinned and 8 cm long, so you can use an extension connector or solder or join them directly.
