The NETGEAR MS108UP is an unmanaged multi-gigabit PoE++ switch with eight 2.5G Ethernet ports. Each port supplies up to 60 W with Ultra60 PoE++ technology, and the switch has a total PoE budget of 230 W. It can power devices such as VoIP phones, surveillance IP cameras and wireless access points.
Setup is plug-and-play. PoE Auto-Balance distributes PoE power automatically according to what each device needs, regardless of the PoE class detected. The metal housing is compact and fanless, and the switch can be wall mounted. It is not rack mountable.
- Switch type
- Unmanaged
- Ports
- 8 x 2.5G Ethernet RJ-45 (100/1000/2500 Mbit/s)
- PoE
- 8 PoE++ ports, up to 60 W per port
- PoE budget
- 230 W total
- Switching capacity
- 40 Gbit/s
- Packet buffer
- 1.5 MB
- Forwarding rate
- 1488000 pps (1 Gbps)
- Latency
- 3.593 µs (1 Gbps)
- MAC address table
- 16000 entries
- Jumbo frames
- Supported, up to 12000
- VLANs
- 64 supported
- Features
- QoS, auto-sensing, auto MDI/MDI-X, full and half duplex
- 10G support
- No
- Standards
- IEEE 802.1p, 802.3, 802.3ab, 802.3af, 802.3at, 802.3az, 802.3bt, 802.3u, 802.3x
- Housing
- Metal
- Cooling
- Fanless
- Mounting
- Wall mountable; not rack mountable
- Power
- DC, 54 V, 4.7 A; power supply included
- Heat dissipation
- 923.49 BTU/h
- Operating temperature
- 0 to 40 °C
- Storage temperature
- -20 to 70 °C
- Operating humidity
- 0 to 90% relative humidity
- Operating altitude
- 0 to 3000 m
- MTBF
- 373643.7 hours
- EMC
- CE, FCC part 15 Class B, ISED, VCCI, KC, CCC, BSMI, RCM
- Certification
- CB, CSA, CCC, BSMI, RCM
- Dimensions
- 8.27 x 5.51 x 1.57 in (210 x 140 x 40 mm) W x D x H
- Weight
- 31.7 oz (900 g)
- Part number
- MS108UP-100NAS