
NEU MASTER Pneumatic Brad Nailer
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The NEU MASTER Pneumatic Brad Nailer is a 2-in-1 air tool that fires 18 gauge brad nails from 5/8 to 2 inches and 1/4 inch narrow crown staples from 5/8 to 1-5/8 inches. It runs on a compressor, holds 100 fasteners, and adds tool-free depth and fastener adjustment, a sequential trigger, a 360-degree exhaust, and a nail view window. The kit ships with a case, safety glasses, oil, two Allen wrenches, and a starter fastener supply. It suits trim, casing, and light assembly work where one gun should cover both nails and staples; dedicated single-fastener guns are simpler but need a second tool.
In stockShips from the UK · duties may applyReturn policy
The NEU MASTER Pneumatic Brad Nailer is a 2-in-1 air-powered tool that drives 18 gauge brad nails and 1/4 inch narrow crown staples, so the same gun handles both fastening jobs. It runs on an air compressor rated 60 to 120 psi and connects through a 1/4 inch NPT air inlet. The compressor is required and is not included.
The tool has tool-free adjustments for switching between nails and staples and for setting drive depth, and a view window over the fastener channel lets you watch the drive so you don't overdrive or dent the workpiece. A sequential trigger fires one fastener at a time for controlled placement, and the magazine holds 100 nails or staples. Jammed fasteners clear through an easy jam-clearing design, and 360 degree exhaust vents air away from the work area.
A soft rubber grip and lightweight construction are meant for longer sessions. Typical work includes woodworking, upholstery installation, flooring, molding and trim, picture framing, and door or window installation. Keep the work surface flat and steady for consistent depth, lubricate the tool as recommended to extend its life and reduce jams, and use the view window to monitor drive depth while you work.









