What does the Jerry-C Pro actually do?

It clips onto the objective of a PVS-14 or one tube of a PVS-31 and overlays a 640x512 thermal image on the tube image. The tube shows the ground; the overlay shows warm bodies on it.

Do I need to calibrate the overlay after install?

No. The optical overlay is 1x and lines up with a 1x tube by itself, with no calibration step after install.

What battery does it use and how long does it run?

It runs about 10 hours on the included external battery pack or about 3 hours on one CR123A. Use CR123A only, never a 16340 rechargeable.

The Jerry-C Pro, clamp ring set for PVS-14 and PVS-31 objectives, wireless remote, external battery pack with cable, lens cover, screwdriver, pouch, hard case and manual.

It is rated to 1.5 m of water for 30 minutes and to -40 to +60 C.

Where can I buy the Night Operators Jerry-C Pro COTI Clip-On Thermal Imager?

2 stores we checked sell it, including eBay, Night Operators.

Night Operators Jerry-C Pro COTI Price History: Lowest $2,949.00

Q: What are the image modes?

Highlight and Outline modes, plus an optional adjustable Breathing mode. Controls are on the unit and on the wireless 2.4G remote.

Q: Where is the Night Operators Jerry-C Pro COTI Clip-On Thermal Imager cheapest?

At Night Operators, for $2,949.00, as of our latest check.

From Night Operators

640x512 thermal overlay at 1x makes warm bodies stand out in shadow or brush
Optical overlay lines up by itself, no calibration after install
Clips onto the objective of a PVS-14 or one tube of a PVS-31
Highlight and Outline image modes, plus optional adjustable Breathing
Wireless 2.4G remote control included
External battery pack with cable included, about 10 h runtime at 22 C

Fit: Clips onto the objective lens of Night Operators PVS-14 or one objective of PVS-31; clamp ring set for those housings included. For other brands, email your mod
Care: Use only CR123A 3V lithium batteries; never use 16340 rechargeable batteries (3.7V is higher than the COTI is made for). CR123A not included.
Guarantee: Warranty covers manufacturing defects for 3 months, up to 12 months with Operator Care.
Returns: 14-day return window; defects reported within 14 days of delivery repaired or replaced at their choice; personal-preference returns have an 18% restocking fee.
Shipping: US orders ship duty free from the US warehouse in roughly 3 weeks; elsewhere direct from supplier in roughly 3 to 6 weeks with import duties, taxes and customs
Packs: Jerry-C Pro alone, Jerry-C Pro + PVS-14 kit, or Jerry-C Pro + PVS-31 PRO kit at the FOM you pick.
In the box: Jerry-C Pro COTI clip-on thermal imager x1, Clamp ring set for PVS-14 and PVS-31 objectives x1, Wireless remote control x1, External battery pack with cable x1, Lens cover x1, Screwdriver x1

About the Night Operators Jerry-C Pro COTI Clip-On Thermal Imager

The Night Operators Jerry-C Pro (also sold as the ELF-C Pro) is a COTI clip-on thermal imager for the PVS-14 and PVS-31. It clamps onto the objective lens of a PVS-14 or one tube of a PVS-31. Warm bodies show as a thermal overlay on top of the night vision tube image.

It has a 640x512 thermal sensor with a 12 micron pitch and F/1.0 optics. The 1x magnification lines up with a 1x tube. The overlay is optical, so no calibration is needed after installation.

Image modes are Highlight and Outline, plus an optional adjustable Breathing mode. Controls are on the unit and on the included wireless 2.4G remote. It also has an electronic compass and auto brightness. It runs on the included external battery pack or on one CR123A battery. Use only CR123A batteries, never 16340 rechargeables.

Sensor: 640x512 thermal, 12 micron pitch
Optics: F/1.0, 1x magnification
Overlay: 35 x 30 degrees, optical, no calibration after install
Modes: Highlight, Outline, optional adjustable Breathing
Controls: On the unit and on the wireless 2.4G remote
Features: Electronic compass, auto brightness
Compatibility: Night Operators PVS-14 and one objective of PVS-31; other brands: email your mod
Power: External battery pack with cable, or one CR123A 3V lithium battery
Battery life: About 10 hours on the external battery pack (at 22 C), about 3 hours on one CR123A
Weight: About 90 g
Water rating: 1.5 m for 30 minutes
Temperature: -40 to +60 C
Battery note: CR123A not included; never use 16340 rechargeable batteries (3.7V is too high)
In the box: Jerry-C Pro COTI clip-on thermal imager, clamp ring set for PVS-14 and PVS-31 objectives, wireless remote control, external battery pack with cable, lens cover, screwdriver, pouch, hard case, manual