Prices are checked against each store and labelled with when.
This is 10-gauge, two-conductor NM-B cable with a bare ground, sold in a 50 ft length for indoor branch wiring. The copper conductors sit under a PVC jacket, and the flat cable is meant for runs through studs, joists and ceilings in dry, protected locations. It suits 30-amp circuits such as electric dryers, water heaters and heavy dedicated loads, where 14- and 12-gauge cable would be undersized. Compared with name-brand NM-B from the big wire makers, it is a generic spool with no listed agency markings in the material, so check the jacket print for UL or ETL listing and the temperature and ampacity ratings before you pull it into a wall.
In stockSold by JLRHReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
This is NM-B electrical wire with two 10 AWG conductors plus a ground, in a 50 ft length. Each conductor has a copper core covered by its own insulation, and the whole cable is wrapped in a thick PVC outer sheath.
The conductors are made of high-purity copper for conductivity, and the individual insulation on each one guards against short circuits. The PVC sheath is flame-retardant: it resists ignition and self-extinguishes when exposed to fire, which helps keep flames from spreading.
The cable is flexible enough to be cut, stripped, and bent during installation, and it withstands stretching and bending without damage. It is used for indoor residential wiring such as outlets, switches, lighting circuits, and other loads.
It checks today's price at every store, compares the alternatives and answers in about a minute.












