Prices are checked against each store and labelled with when. Store links may earn us a commission. As an Amazon Associate, Deal.ai earns from qualifying purchases.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The NVX NSW122v3 is a 12-inch car subwoofer rated at 500W RMS (1000W peak) with dual 2-ohm voice coils, so it can be wired to 1 or 4 ohms depending on the amp. It uses a pressed paper cone, high-roll foam surround, 2-inch copper voice coil and a hefty 112 oz double-stacked ferrite magnet. The 12.5 mm Xmax and 34.67 Hz resonance point to solid low-end output for the money, and its 6-inch mounting depth fits many standard enclosures. It suits budget-minded bass builders who want a flexible dual-voice-coil driver rather than a premium SQ sub.
Availability unknown
As an Amazon Associate, Deal.ai earns from qualifying purchases.
Also available at
Store links may earn us a commission.
Lowest price we've seen: $99.99 on Nov 13 at Amazon. Tracked across 1 store since Nov 13.
Rated 4.8 out of 5 across 37 ratings, owners largely report strong output and good build for the money. Complaints are few and mostly about power demands and installation depth.
The NSW122 Version 3 is a 12-inch dual 2-ohm subwoofer from the NVX N-Series. It handles 500 watts RMS and 1000 watts peak, with 12.5 mm of Xmax.
The cone is enhanced pressed paper with a high-roll foam surround. The basket is vented stamped steel with a punched NVX logo. The motor uses a 2.0-inch high-temperature copper voice coil on an aluminum former, a progressive roll single-layer spider with integrated tinsel leads, and an optimized high-velocity pole vent. A 112 oz. double-stacked ferrite magnet with a protective rubber boot drives it.
It can be installed in a sealed or ported enclosure. The recommended box volume is 1.25 cubic feet for sealed and 2.0 cubic feet for ported.
