The NSW82v3 is an 8-inch dual 2-ohm subwoofer from the NVX N-Series. It handles 800 watts peak and 400 watts RMS, and it has 10.5 mm of Xmax.
The cone is enhanced pressed paper with a high-roll foam surround. The basket is vented stamped steel with a punched NVX logo. The 2.0-inch high-temperature copper voice coil sits on an aluminum former. A progressive roll single-layer spider with integrated tinsel leads and an optimized high-velocity pole vent complete the motor. The 90 oz. double-stacked ferrite magnet has a protective rubber boot.
The recommended enclosure is a ported box of .75 cubic feet. The subwoofer is CTA-2031 compliant and comes with a 1-year warranty from the original purchase date.
- Size
- 8"
- Voice coils
- Dual 2-ohm
- Peak power
- 800 watts
- RMS power
- 400 watts
- Xmax
- 10.5 mm
- Cone
- Enhanced pressed paper
- Surround
- High-roll foam
- Basket
- Stamped steel, vented, with NVX punched logo
- Voice coil
- 2.0" high-temperature copper with aluminum former
- Spider
- Progressive roll single-layer with integrated tinsel leads
- Pole vent
- Optimized high-velocity
- Magnet
- 90 oz. double-stacked ferrite with protective rubber boot
- Frequency response
- 20 - 200 Hz
- Resonance (Fs)
- 39.10 Hz
- Sensitivity
- 85 dB
- Box volume
- .75 cubic feet, ported (recommended)
- Top-mount depth
- 4.98"
- Cutout diameter
- 7.12"
- Compliance
- CTA-2031
- Warranty
- 1 year from the original purchase date
- Documentation
- N-Series Owner's Manual