This is a standalone OBD2 scanner and code reader. It plugs into a vehicle's OBD2 port, which is usually under the dashboard on the driver's side. It reads and clears engine fault codes (DTCs), which turns off the check engine light after a repair. If the underlying issue is not resolved, the light will return.
It also shows live sensor data such as engine RPM, coolant temperature, vehicle speed and oxygen sensor readings while the engine is running. Freeze frame data records the engine conditions at the moment a fault code was triggered, which helps with diagnosing intermittent problems. I/M readiness status shows whether the emissions-related monitors are ready before a smog or emissions inspection.
The scanner draws power from the OBD2 port, so it needs no batteries. Plug it in, turn the ignition on, and start scanning. No phone, tablet, software or app is needed. It works with all OBDII-compliant vehicles, which covers US cars and light trucks from 1996 onward and most international vehicles after 2001.
- Protocols
- All OBDII protocols (CAN, ISO, KWP, PWM, VPW)
- Compatibility
- All OBDII-compliant vehicles: US cars and light trucks 1996+, most international vehicles 2001+
- Functions
- Read/clear DTCs, live data, freeze frame, I/M readiness
- Power
- Vehicle OBD2 port, no battery required
- Connection
- Direct OBD2 port plug-in
- Setup
- No software installation required
- Color
- Blue