Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Oriental Motor PH268-01 is a NEMA 23-size hybrid stepper motor: a 56.4 mm square flange body, 1.8 degrees per step (200 steps per revolution), and a 1/4-inch shaft 0.75 inch long. It is a 6-wire unipolar/bipolar unit rated 5.4V and 1.5A per phase, with a 4-hole flange on 2/5/8-inch centers. That makes it a general-purpose positioning motor for DIY CNC, 3D printer builds, linear stages and small automation where a standard 57 mm frame and quarter-inch shaft fit. It is an older, low-voltage design; modern NEMA 23 motors in the same frame typically run higher current with more holding torque, so compare torque curves before choosing it for a load-bearing axis.
Availability unknown
Lowest price we've seen: $89.98 on Nov 3 at Electronic Surplus. Tracked across 1 store since Nov 3.
This is an Oriental Motor PH268-01 stepper motor. It is rated for 5.4V and 1.5 amps and moves 1.8 degrees per step. It has 6 wires.
The motor has a panel/flange mount that is 2.220 inches (56.4 mm) square. The 4-hole mounting pattern uses 2/5/8 inch centers. The shaft is 1/4 inch in diameter and 0.75 inch long.