This is a 5-in-1 gas-powered multi-tool built around a 52cc, 2-stroke, single-cylinder, air-cooled engine rated at 2.3KW. The engine runs at a working speed of 8,000 to 9,500 RPM. One powerhead takes five attachments: a string trimmer, a brush cutter, a hedge trimmer, a chainsaw and an extension pole.
The string trimmer head cuts a 380mm width with 2mm twin line and a bump feed. The brush cutter uses a 230mm 3-tooth blade, and a 40-tooth blade is also included. The 400mm hedge trimmer has a 24mm cutting capacity. The 10-inch chainsaw has a maximum cutting length of 200mm.
Starting features include air purge technology that removes air from the carburetor, a bounce-back start system, and an auto-return stop switch that resets to "ON". The handle is ergonomic, and the shaft is detachable for transport and storage. The included 43.31" extension rod adds reach. The tool is built from metal and plastic.
- Engine
- 52cc, 2-stroke, single cylinder, air-cooled
- Max power
- 2.3KW
- Working speed
- 8,000–9,500 RPM
- Idle speed
- 3,000 RPM
- Fuel tank
- 1.2L
- Extension rod
- 43.31" (134cm)
- String trimmer
- 380mm cut width, 2mm twin line, bump feed
- Brush cutter blade
- 3-tooth, 230mm cutting diameter
- Hedge trimmer
- 400mm blade length, 24mm cutting capacity, 1,400 RPM no-load speed
- Chainsaw
- 10" (250mm) bar, 200mm max cutting length, 10 m/s chain speed
- Chainsaw oil tank
- 120cc
- Dimensions
- Approx. 70.87" × 10.24" × 10.24" (L × W × H)
- Material
- Metal and plastic
- Color
- Orange
- In the box
- 52cc engine (powerhead); control rod; 43.31" extension rod; hedge trimmer rod; chainsaw rod; brush cutter rod; 3-tooth blade; 40-tooth blade; plastic trimmer head; 2mm twin line nylon rope; oil tank;