- Can it sand inside curves?
- Yes. The oscillating spindle mode with the 1/2" to 2" sleeves is made for inside curves, rounded edges and contoured cuts. The belt handles flat edges and faces.
- Does the table really tilt to 45 degrees?
- The worktable adjusts from 0° to 45°, which lets you sand beveled edges and angled joints. Check the angle setting before each pass on critical work.
- What comes in the box?
- One 4" x 24" sanding belt and five sanding sleeves in 1/2", 3/4", 1", 1-1/2" and 2". Spindle drums and the tilting table are part of the machine.
- Will a shop vacuum fit the dust port?
- The port is 1-17/32 inches, so a standard 1-1/4-inch or 1-1/2-inch hose may need an adapter. A dedicated dust collector also works.
- Is 500W enough for hardwood?
- It handles light to moderate passes in hardwood. Take shallow cuts and let the belt speed do the work rather than forcing stock into the sander.
- Belt or spindle for squaring edges?
- Use the belt with the table at 90° for squaring edges and flattening end grain. Switch to the spindle for curves and inside contours.
- Where is the Oscillating Belt and Spindle Sander, 500W Benchtop Belt Sander with 4" x 24" Sanding Belt, 5 Sanding Sleeves, 0°-45° Tilting Table & Dust Port for Woodworking, Furniture & DIY, Black cheapest?
- At Amazon, for $161.90, as of our latest check.
- Where can I buy the Oscillating Belt and Spindle Sander, 500W Benchtop Belt Sander with 4" x 24" Sanding Belt, 5 Sanding Sleeves, 0°-45° Tilting Table & Dust Port for Woodworking, Furniture & DIY, Black?
- 2 stores we checked sell it, including MakeIt Studio, Amazon.
