Will it charge my portable power station directly?

Yes, if your station accepts MC4 or an MC4-to-its-own adapter. The panel outputs about 20.5V at 4.88A, within the solar input range of most 100W-class stations. Check your station's input voltage limit and connector before buying.

Does it need a charge controller?

Only if you connect it straight to a bare battery. Plugged into a power station, the station's built-in controller handles regulation. For a loose 12V battery, add an MPPT or PWM controller.

How much power does it actually produce?

Expect close to the rated 100W only in full, direct sun with the panel angled at it. Clouds, shade and flat placement cut output, as with any panel. Real-world output is usually lower than the rating.

It carries an IP65 rating, so it resists dust and water jets. That covers rain showers and splashes, not submersion. Keep the junction box and connectors out of standing water.

How big and heavy is it?

It weighs 12.48 lb and folds to 21.8 x 23.2 x 1.9 in, opening to 43.7 x 23.2 in. That is manageable to carry short distances but heavier than thin-film folding panels.

What comes in the box?

The panel with its attached 196.8 in cable and MC4 connectors. Adapters for non-MC4 power stations are generally sold separately, so confirm what your setup needs.