Owens Corning R-11 Kraft Faced Batts are flexible fiberglass insulation batts for roof and ceiling applications and for interior and exterior walls. They install in wood or metal framing cavities or between furring channels. They can also be used on the interior surfaces of basement and unvented crawl space foundation walls.
The batts have a Kraft paper facing that acts as a vapor retarder on one side. They are inorganic and non-corrosive to steel, aluminum and copper. They are dimensionally stable and will not decay or slump in the cavity.
The batts are easy to handle and install. They can be stapled or friction-fit, and they can be trimmed with a utility knife. They meet thermal specifications and improve interior noise control. They can be used in both residential and commercial buildings.
- R-Value
- R11
- Material
- Fiberglass
- Facing
- Kraft paper vapor retarder
- Thickness
- 3.5 in.
- Batts per bag
- 16
- Size 1
- 3.5 x 15 x 93 in.; 155 sq ft per bag; for wood framing; IRN WO1Q
- Size 2
- 3.5 x 15 x 105 in.; 175 sq ft per bag; for wood framing; IRN F86
- Size 3
- 3.5 x 16 x 96 in.; 170.67 sq ft per bag; for metal framing; IRN M42Q
- Size 4
- 3.5 x 23 x 93 in.; 237.67 sq ft per bag; for wood framing; IRN K12
- Size 5
- 3.5 x 24 x 96 in.; 256 sq ft per bag; for metal framing; IRN M45
- Installation
- Staple or friction-fit
- Cutting
- Trim with a utility knife
- Applications
- Roof/ceiling, interior and exterior walls, floors, basement and unvented crawl space foundation walls