Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This bundle adds the AMS 2 Pro multi-material feeder to a Bambu Lab A1-series printer, plus the A1 AMS Hub and the AMS 2 Pro's power adapter. The AMS 2 Pro holds four spools and dries filament with active 65°C ventilation inside a sealed enclosure, so you can print with damp-prone materials like PETG, TPU and nylon more reliably. It uses brushless servo feed motors and can chain up to six units for 24 colors or materials. Against the original AMS, the drying and sealed storage are the main gains; the hub is what lets the A1 run the AMS at all. It suits A1 and A1 mini owners who print multi-color or want dry filament on demand.
In stockShips from France · priced in EUR (€234.68) · duties may applyReturn policy
This pack upgrades a Bambu Lab A1 series printer for multi-material printing. It combines the AMS 2 Pro multi-material loading system with the A1 series AMS Hub and the AMS 2 Pro power adapter.
The AMS 2 Pro dries filament with active ventilation at 65°C and stores it in an airtight enclosure. Spools rotate automatically while drying, so the filament dries more evenly. Automatic venting helps remove humidity during drying. It uses a brushless servo feeder motor and RFID filament synchronization. With 6 AMS 2 Pro units, it can print up to 24 colors or materials.
The filament tubes can be reached directly from the top without tools. On the first-generation AMS, removing broken filament means taking out all the spools and removing the shell, which is held by two screws, and takes 3 to 5 minutes. The filament inlets are ceramic with a Vickers hardness of 1200.