
Palm Carving Tool Sweep #5 10 mm, Linoleum And Block Cutters, Micro Wood Engraving Chisel
Best price now
Prices are checked against each store and labelled with when.
Finding cheaper alternatives
Price facts
- Lowest price today: $69.00 at WOOD SCULPTING TOOLS (checked Nov 19, 2026).
Our take on the Palm Carving Tool Sweep #5 10 mm, Linoleum And Block Cutters, Micro Wood Engraving Chisel
This is a palm-sized carving gouge with a 10 mm sweep #5 blade in carbon steel hardened to 58-60 HRC. The blade is 80 mm long and the whole tool 130 mm, with an oiled oak handle shaped to sit in the palm. It arrives hand-sharpened and ready to cut soft and hard wood, and it also works on linoleum and block printing. It suits detail work and small relief carving where a full-length gouge is too long to control.
- Hand-sharpened edge, ready to use
- Carbon steel at 58-60 HRC holds an edge
- Short 130 mm length gives close control
- Oiled oak handle fits the palm
- Cuts both soft and hard wood
- Single 10 mm sweep #5 size only
- Carbon steel needs drying and oiling to avoid rust
- Palm handle is small for large hands or two-handed cuts
- No mention of a blade guard or storage case
Palm Carving Tool Sweep #5 10 mm, Linoleum And Block Cutters, Micro Wood Engraving Chisel prices at every store
- WOOD SCULPTING TOOLSNew
In stockShips from Spain · duties may applyReturn policy
$69.00Checked 7 h ago
About the Palm Carving Tool Sweep #5 10 mm, Linoleum And Block Cutters, Micro Wood Engraving Chisel
This palm carving tool is made for detailed patterns and engraving. It has a sweep #5, 10 mm blade and comes sharpened and ready to use.
The blade is carbon steel, 3 mm thick and 80 mm long, with a 58-60 HRC hardness. The tool is 130 mm long overall. The oak handle has a linseed oil finish and an ergonomic shape for comfortable carving without extra pressure on the hands.
Each chisel is sharpened by hand for soft, even, smooth, and clear cuts in hard and soft wood. The edge is made for long work and does not need frequent grinding.
- Sweep
- #5, 10 mm
- Material
- Carbon steel
- Metal thickness
- 3 mm
- Hardness
- 58-60 HRC
- Blade length
- 80 mm
- Total length
- 130 mm
- Handle
- Oak wood with linseed oil finish
- Sharpening
- Hand-sharpened, ready to use
- Use
- Soft and hard wood
- Edge care
- Does not need frequent grinding
Ask our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.
Questions and answers
- What is a sweep #5 gouge used for?
- Sweep #5 is a shallow, fairly flat curve. It is used for clearing waste, shallow hollows and general shaping rather than deep U-shaped flutes.
- Is it ready to use out of the package?
- Yes. The maker says each chisel is sharpened entirely by hand and needs no grinding before first use.
- Will it work on linoleum?
- Yes. It is listed for linoleum and block cutting as well as wood, and the 10 mm width suits clearing larger areas of a block.
- How do I keep the edge in shape?
- Strop the bevel regularly on leather or a fine stone. The maker says the hand sharpening is meant to last and does not need frequent grinding.
- Does it come with a case?
- No case or guard is listed. The tool is supplied on its own.
- Where is the Palm Carving Tool Sweep #5 10 mm, Linoleum And Block Cutters, Micro Wood Engraving Chisel cheapest?
- At WOOD SCULPTING TOOLS, for $69.00, as of our latest check.



