Will this TPU work on my printer?

It needs an FDM printer that handles flexible filament. Direct-drive extruders feed 95A TPU far more reliably than long Bowden tubes, where the filament tends to buckle.

How flexible is 95A TPU?

95A is mid-range TPU: it bends and springs back but holds shape under light load. It suits cases, gaskets and grips rather than soft, rubbery parts like 85A.

What temperatures should I print it at?

PANZXK does not publish a temperature range here. TPU generally prints around 210-230C on the hotend with a heated bed near 40-60C, so start there and tune on a small test print.

How fast can I print it?

Slow. Soft filament usually prints best at 20-30mm/s, and faster speeds cause under-extrusion, stringing and jams on most setups.

What is on the spool?

One 250g spool of 1.75mm pink TPU filament with a stated diameter tolerance of +/- 0.03mm.

Does it need drying before use?

TPU absorbs moisture, so dry it if prints pop, bubble or string badly. Store the spool sealed with desiccant between uses.

PANZXK TPU Filament 1.75mm, Flexible 95A TPU, 250g Spool

Best price now

$11.99at WalmartChecked Nov 8

Prices are checked against each store and labelled with when.

Visit Walmart

PANZXK TPU Filament 1.75mm, Flexible 95A TPU, 250g Spool

Best price now

$11.99at WalmartChecked Nov 8

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $11.99 at Walmart on Nov 8.

Our take on the PANZXK TPU Filament 1.75mm, Flexible 95A TPU, 250g Spool

PANZXK's TPU filament is a flexible 95A material on a 250g spool, aimed at FDM printers that can handle soft filament. The 95A hardness sits in the middle of the TPU range: firm enough to feed more reliably than 85A, springy enough for phone cases, gaskets, insoles and wearables. Dimensional accuracy is stated at +/- 0.03mm, which is the usual tolerance for budget filament. The small spool keeps the outlay low for a material many printers struggle with, but 250g runs out fast on larger parts.

Best forMakers printing flexible parts on a direct-drive printerPhone cases, gaskets and wearablesTrying TPU without committing to a large spoolSmall flexible prototypes and grips

Pros

95A hardness balances flexibility and feedability
Stated +/- 0.03mm diameter tolerance
250g spool suits first-time TPU users
Works with most FDM printers that support flexible filament

Cons

Bowden extruders often buckle soft TPU
250g is little for big prints
TPU needs slow speeds and retraction tuning
Soft filament can string and ooze

PANZXK TPU Filament 1.75mm, Flexible 95A TPU, 250g Spool prices at every store

WalmartNew
In stockSold by NRVBaitsReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$11.99Free shippingChecked Nov 8
Visit Walmart

About the PANZXK TPU Filament 1.75mm, Flexible 95A TPU, 250g Spool

This is a flexible TPU 3D printer filament with a 95A hardness rating. It has a diameter of 1.75mm and comes on a 250g spool.

Dimensional accuracy is +/- 0.03mm. The filament is compatible with most FDM 3D printers.

Material: TPU, 95A flexible
Diameter: 1.75mm
Accuracy: +/- 0.03mm
Weight: 250g spool
Color: Pink
Compatibility: Most FDM 3D printers

Specifications

color: PinkSource
actual_color: pinkSource

Questions and answers

Will this TPU work on my printer?: It needs an FDM printer that handles flexible filament. Direct-drive extruders feed 95A TPU far more reliably than long Bowden tubes, where the filament tends to buckle.
How flexible is 95A TPU?: 95A is mid-range TPU: it bends and springs back but holds shape under light load. It suits cases, gaskets and grips rather than soft, rubbery parts like 85A.
What temperatures should I print it at?: PANZXK does not publish a temperature range here. TPU generally prints around 210-230C on the hotend with a heated bed near 40-60C, so start there and tune on a small test print.
How fast can I print it?: Slow. Soft filament usually prints best at 20-30mm/s, and faster speeds cause under-extrusion, stringing and jams on most setups.
What is on the spool?: One 250g spool of 1.75mm pink TPU filament with a stated diameter tolerance of +/- 0.03mm.
Does it need drying before use?: TPU absorbs moisture, so dry it if prints pop, bubble or string badly. Store the spool sealed with desiccant between uses.
Where is the PANZXK TPU Filament 1.75mm, Flexible 95A TPU, 250g Spool cheapest?: At Walmart, for $11.99, as of our latest check.